{"product_id":"360-s6-pro-replacement-battery-144v-5200mah-li-ion","title":"360 S6 Pro Replacement Battery 14.4V 5200mAh D080-4S2P","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003e360 S6 Pro \/ S9 \/ X90 \/ X95 — 14.4V Li-ion Replacement Battery (D080-4S2P)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 5200mAh Li-ion battery pack for the 360 S6 Pro, S9, X90, and X95 cordless stick vacuums. It powers the vacuum's motor and suction system directly. OEM part numbers D080-4S2P and INR18650 M26-4S2P both cross to this pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eS6 Pro, S9, X90, X95 platform:\u003c\/strong\u003e\n    These four models share the same 14.4V battery rail, connector pinout, and BMS handshake protocol. One pack fits all four without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through full charge and discharge cycles on the S6 Pro platform. The BMS communicated correctly with the charger, current draw stayed within spec under motor-start load, and the protection circuit tripped cleanly at the expected undervoltage threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for this vacuum:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. Continuous dock charging accelerates capacity fade on these packs faster than on most other cordless tools. Charge to full, then remove it from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the S6 Pro and its platform siblings, suction can noticeably drop while the indicator still shows two or three bars. This happens because a restricted filter forces the motor to draw more current than rated, causing voltage sag at the cells before the state-of-charge display catches up. The BMS sees real cell voltage rather than averaged capacity, so it may throttle output to protect the pack while the indicator lags behind. Clean or replace the filter first — if suction recovers, the battery is not the fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a failed battery. When suction is sustained against a blockage or a heavily loaded carpet, current draw spikes above the protection threshold and the BMS disconnects the output. After a few seconds the pack cools slightly, the BMS resets, and the motor restarts. Clear any blockage, check the filter, and test again on a hard floor. If the cut-out stops occurring, the pack is working correctly — the restriction was triggering the trip.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427993518170,"sku":"BWCS-EFL700VX-1","price":81.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427993550938,"sku":"BWCS-EFL700VX-2","price":95.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427993583706,"sku":"BWCS-EFL700VX-3","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EFL700VX-1.webp?v=1779933799","url":"https:\/\/batteryweb.com\/products\/360-s6-pro-replacement-battery-144v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}