{"product_id":"3m-pl300-replacement-battery-74v-1600mah-li-ion","title":"3M PL300 Replacement Battery 7.4V 1600mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003e3M PL300 — 7.4V Li-ion Replacement Battery (PL-300-BAT)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V, 1600mAh lithium-ion battery replaces the original PL-300-BAT cell in the 3M PL300 portable label printer. It fits the compact thermal print unit used in retail stockrooms, logistics hubs, and office environments where on-demand label printing happens away from a fixed workstation. Voltage and capacity match the original spec exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePL300 platform fit:\u003c\/strong\u003e\n    The PL300 runs a single-cell 7.4V nominal Li-ion pack with a proprietary connector and BMS handshake that governs thermal head activation and paper feed motor torque. This replacement uses the same voltage rail and connector pinout, so the printer firmware recognises the pack without flags or lockout.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the PL300's print sequence — thermal head draw, paper feed motor engagement, and Bluetooth radio load — and the BMS held steady through each phase without triggering voltage sag cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install print sequence:\u003c\/strong\u003e\n    After fitting and charging to full, run five test labels before deploying the printer in the field. The paper feed motor draws a calibration current spike on each print cycle, and completing five prints confirms the BMS current profile is correctly set for the new cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the PL300 won't print after sitting unused for weeks\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge at roughly 1–3% per month, but the PL300's BMS sets a minimum drive voltage threshold before it will energise the thermal head. If the pack drops below approximately 6.4V during storage, the printer powers on but refuses to print — the BMS withholds current to protect the cell. Plug into a charger for at least 30 minutes before attempting to print. Once the pack climbs back above the threshold, the print function restores without any reset procedure.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFaded or uneven print across the label width\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe thermal print head requires a stable voltage supply to heat each dot element to the correct activation temperature. When the battery is low or the cell is degraded, voltage sags mid-print cycle and some dot elements don't reach full temperature — the result is pale bands or uneven density across the label. This is not a head fault or a media issue. Charge the battery fully and reprint; if the fading disappears, the original cell had lost capacity. A fresh pack at full charge resolves the issue at the source.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415991156826,"sku":"BWCS-DML600SL-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415991189594,"sku":"BWCS-DML600SL-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415991222362,"sku":"BWCS-DML600SL-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DML600SL-1.webp?v=1779758840","url":"https:\/\/batteryweb.com\/products\/3m-pl300-replacement-battery-74v-1600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}