{"product_id":"aeg-cx8-2-75ff-replacement-battery-296v-3000mah-li-ion","title":"AEG CX8-2-75FF Compatible Battery 29.6V 3000mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAEG CX8-2-75FF Series — 29.6V Li-ion Replacement Battery (140112530252)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 29.6V, 3000mAh (88.8Wh) lithium-ion battery for the AEG CX8-2-75FF cordless stick vacuum and compatible CX8 series models. It replaces OEM part numbers 140112530252, 140112530047, 140112530179, and 140112530278. Fit models include the CX8-2-75FF, CX8-2-75MG, and additional CX8 variants sharing the same battery bay and connector.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCX8 series battery platform:\u003c\/strong\u003e\n    The CX8 lineup runs on a shared 29.6V battery rail across both the FF and MG variants. The connector orientation, BMS handshake protocol, and cell arrangement are identical across these models — one battery fits the group without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through the CX8 charge cycle and confirmed the BMS communicates correctly with the AEG charger. Charging initiated without error codes, and the protection circuit responded normally to sustained motor draw across carpet and hard floor modes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on CX8 vacuums:\u003c\/strong\u003e\n    Do not leave the CX8 sitting on the charging dock permanently. Continuous dock contact keeps the charger topping up the cell in small pulses, which accelerates capacity fade over months. Charge to full, remove from the dock, and reconnect only when the battery is depleted.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator shows low on the CX8\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe CX8 motor draws significantly more current when the filter is partially blocked — even a filter that looks clean can restrict airflow enough to push draw above the BMS threshold. When current spikes, the BMS may throttle output voltage before the fuel gauge registers a low charge. The vacuum loses suction, but the indicator still shows two or three bars. Clean or replace the filter first before assuming the battery is at fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCX8 motor cuts out mid-clean then recovers after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. The CX8 motor protection circuit cuts power when sustained current draw exceeds the rated ceiling — most often triggered by a blocked filter or a partial blockage in the suction path. The BMS resets after the cell cools slightly, which is why the vacuum restarts after 30–60 seconds. Clear the blockage and wash the filter before the next use. If the cut-out persists on a clean filter, confirm cell voltage sits above 25V before dismissing the battery as a cause.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427965829210,"sku":"BWCS-AEC827VX-1","price":121.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427965861978,"sku":"BWCS-AEC827VX-2","price":143.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427965894746,"sku":"BWCS-AEC827VX-3","price":160.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-AEC827VX-1.webp?v=1779933519","url":"https:\/\/batteryweb.com\/products\/aeg-cx8-2-75ff-replacement-battery-296v-3000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}