{"product_id":"aikitec-powerkit-bl-40b-500-replacement-battery-37v-660mah-li-ion","title":"Aikitec Powerkit BL-40B-500 3.7V Compatible Battery 660mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAikitec Powerkit BL-40B-500 — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 660mAh lithium-ion replacement cell for the Aikitec Powerkit BL-40B-500 camera battery. It fits compatible digital cameras that use this cell format. Physical dimensions are 40.00 × 31.10 × 5.90mm — confirm these match your current cell before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBL-40B-500 format compatibility:\u003c\/strong\u003e\n    Cameras drawing from this cell share the same voltage rail and connector pinout. The 3.7V nominal output aligns with the original BMS voltage thresholds, so the camera's charge controller reads the new cell correctly across the discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and full discharge on compatible camera hardware. The BMS accepted the cell without tripping low-voltage cutoff prematurely, and the protection circuit held stable across the full discharge range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle BMS initialisation:\u003c\/strong\u003e\n    Run the first full charge inside the camera body or OEM charger, not a third-party universal charger. Some camera BMS systems only begin tracking state-of-charge accurately after completing one charge cycle through the native charge controller.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCamera showing dead battery indicator on a partially charged replacement cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eA new lithium-ion cell has a slightly different discharge curve compared to a worn original. The camera's fuel gauge maps voltage thresholds set during calibration with the factory cell. When those thresholds don't line up with the new cell's curve, the camera can report empty at a voltage the cell hasn't actually hit yet. One full charge-to-discharge cycle via the camera body typically re-aligns the indicator. After that cycle, the readout should track accurately through subsequent charges.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping erratically on the camera display\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eErratic percentage readings come from the camera's voltage-to-percentage lookup table conflicting with the new cell's discharge profile. The camera samples terminal voltage and maps it to a percentage — if the new cell's voltage drops faster or slower at a given point, the display jumps. This is a calibration state issue, not a cell defect. Charge the battery fully to 4.2V via the camera body, then run it down in a single session to let the BMS re-map the curve.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333857771610,"sku":"BWCS-LI40B-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333857804378,"sku":"BWCS-LI40B-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333857837146,"sku":"BWCS-LI40B-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LI40B-1.webp?v=1778213291","url":"https:\/\/batteryweb.com\/products\/aikitec-powerkit-bl-40b-500-replacement-battery-37v-660mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}