{"product_id":"aiptek-mpvr-digital-media-replacement-battery-37v-750mah-li-ion","title":"Aiptek MPVR Compatible Battery 3.7V 750mAh ZPT-NKA","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAiptek MPVR Digital Media — 3.7V Li-ion Replacement Battery (ZPT-NKA)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 750mAh (2.78Wh) Li-ion cell replaces the ZPT-NKA battery in the Aiptek MPVR Digital Media player. The MPVR is a compact handheld device used for portable video and photo playback. When the original cell degrades and can no longer hold adequate charge, this replacement restores normal operation.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMPVR platform fit:\u003c\/strong\u003e\n    The MPVR uses a compact single-cell 3.7V Li-ion pack with a fixed connector and BMS matched to the device's low-draw media playback circuit. The ZPT-NKA form factor — 53.49 × 33.44 × 6.91mm — is specific to this chassis with no common cross-platform variants.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full charge and discharge on the MPVR platform. The BMS responded correctly to the device's charge IC, accepted a full charge without cutoff errors, and held voltage steady under screen-on media load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After installing this cell, run one complete discharge-to-charge cycle before relying on the battery percentage indicator. The MPVR's fuel gauge IC is calibrated to the old cell's discharge curve and needs one full cycle against the new cell to report accurately.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the MPVR reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe MPVR uses a fuel gauge IC that tracks charge using a coulomb counter calibrated against the original cell's discharge curve. A new cell has a different internal resistance and discharge profile, so the stored calibration no longer maps correctly to actual remaining charge. The device may show 40% while the cell is near depletion, or jump several percentage points in seconds. One full discharge from 100% to automatic shutdown, followed by a complete charge, resets the calibration baseline against the new cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMPVR shuts off suddenly at 20–30% remaining\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a voltage cliff failure — the cell's internal resistance rises enough that under screen-on or active playback load, terminal voltage drops sharply below the BMS cutoff threshold even though the fuel gauge still shows charge remaining. The BMS trips as a protection response, not a capacity issue. It is most common in the first few cycles on a replacement cell before the fuel gauge IC has recalibrated. Run two full discharge-charge cycles; if shutdowns persist past 3.6V terminal voltage under load, check the connector seating on the battery contacts.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409482416218,"sku":"BWCS-NKB2ML-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409482448986,"sku":"BWCS-NKB2ML-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409482481754,"sku":"BWCS-NKB2ML-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NKB2ML_1.webp?v=1778213576","url":"https:\/\/batteryweb.com\/products\/aiptek-mpvr-digital-media-replacement-battery-37v-750mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}