{"product_id":"aisino-v71-replacement-battery-37v-2600mah-li-ion","title":"Aisino V71 POS Terminal Replacement Battery IS803 3.7V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAisino V71 — 3.7V Li-ion Replacement Battery (IS803)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V 2600mAh Li-ion replacement battery for the Aisino V71 mobile payment terminal. It carries OEM part number IS803 and fits the V71 directly. Merchants use this to restore all-day operation when the original cell no longer holds a usable charge.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eV71 terminal fit:\u003c\/strong\u003e\n    The V71 runs a single-cell 3.7V Li-ion architecture. This battery matches that voltage rail, the physical connector, and the BMS handshake the terminal expects. Swapping in a mismatched cell voltage causes the terminal to refuse to boot or fault out immediately.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the V71's charge IC and confirmed the BMS accepted the handshake without fault codes. The protection circuit responded correctly to overcurrent events triggered by the receipt printer motor draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst deployment tip:\u003c\/strong\u003e\n    After installation, run one complete transaction — card tap or swipe through to receipt — before putting the terminal into live service. The V71 maps battery capacity during normal operation and needs at least one full power cycle to calibrate the charge indicator correctly.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eV71 rebooting mid-transaction after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe V71's receipt printer motor pulls a short high-current spike each time it fires. On a new cell that hasn't completed its first charge cycle, the BMS can read that spike as an overcurrent event and trip the protection circuit. This cuts power instantly — which looks like a random reboot mid-sale. Charge the battery to full before the first transaction, then run one complete print cycle to let the BMS establish its baseline current thresholds.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTerminal won't power on after sitting unused in a drawer\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge slowly over weeks. If a V71 sits unused long enough, the cell voltage can drop below 3.0V — the threshold where the BMS locks out discharge to prevent cell damage. The terminal shows nothing when you press the power button. Connect it to the original charger and leave it for at least 30 minutes; the charge IC will trickle charge the cell back above the recovery threshold before switching to normal charge rate. Once the screen shows the charging indicator, the BMS has re-initialised.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415938138202,"sku":"BWCS-VFX675BX-1","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415938170970,"sku":"BWCS-VFX675BX-2","price":33.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415938203738,"sku":"BWCS-VFX675BX-3","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-VFX675BX-1.webp?v=1779758146","url":"https:\/\/batteryweb.com\/products\/aisino-v71-replacement-battery-37v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}