{"product_id":"alan-g7-replacement-battery-6v-700mah-ni-mh","title":"Alan G7 BATT-5R Replacement Battery 6V 700mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAlan G7 — 6V Ni-MH Replacement Battery (BATT-5R)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 6V, 700mAh Ni-MH replacement battery for the Alan G7 handheld two-way radio. It replaces OEM part numbers BATT-5R and PB-ATL\/G7. If your G7 is no longer holding a charge or powering on, this pack restores full radio function.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAlan G7 fitment:\u003c\/strong\u003e\n    The G7 uses a compact Ni-MH pack running at 6V — the same voltage rail and connector format as the OEM BATT-5R. The BMS handshake on this platform is voltage-threshold based, so the pack must arrive at or above the dock's acceptance floor to begin a charge cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through a full charge-discharge cycle on the G7 platform. The BMS accepted the charge without fault, held voltage across PTT press events, and returned to rest voltage within expected range after a full transmit load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst insertion on the dock:\u003c\/strong\u003e\n    If the charger shows a fault LED on first insertion, remove the pack, wipe the contact pins with a dry cloth, and reseat firmly. The G7 dock requires a clean contact cycle to recognise the new pack's voltage before it begins charging.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the G7 cuts out mid-transmission on a new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells ship at storage voltage — typically 1.0–1.1V per cell — not at full charge. On the G7, transmit current draw spikes sharply when PTT is pressed. If the pack hasn't completed a full charge cycle first, that spike can pull cell voltage below the BMS cutoff threshold and drop the radio mid-transmission. This is not a faulty pack. Charge the battery fully before your first transmit session — the dock green light is your confirmation the pack has reached full capacity.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBar indicator showing one fewer bar than expected on a fresh BATT-5R\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe G7 reads battery level using simple voltage thresholds, not a fuel gauge chip. A new pack at storage voltage will sit at the lower threshold and display one fewer bar than it should. This resolves after the first complete charge cycle brings the pack to its rated 6V. If the indicator still reads low after a full charge, check that the dock contacts are clean and making firm contact — a partial connection can cause the dock to undercharge the pack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426372780122,"sku":"BWCS-GXT300TW-1","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426372812890,"sku":"BWCS-GXT300TW-2","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426372845658,"sku":"BWCS-GXT300TW-3","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-GXT300TW-1.webp?v=1779931068","url":"https:\/\/batteryweb.com\/products\/alan-g7-replacement-battery-6v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}