{"product_id":"alcatel-versatis-50-replacement-battery-24v-600mah-ni-mh","title":"Alcatel Versatis 50 Replacement Battery 2.4V 600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAlcatel Versatis 50 \/ 150 \/ 250 \/ 350 — 2.4V Ni-MH Replacement Battery (60AAAAH2BMJ)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 600mAh Ni-MH replacement battery for the Alcatel Versatis 50, 150, 250, and 350 cordless DECT handsets. It slots directly into the handset battery compartment and restores power to a phone that no longer holds charge. Dimensions are 45 x 21 x 10mm, matching the original cell geometry.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatis 50 \/ 150 \/ 250 \/ 350 compatibility:\u003c\/strong\u003e\n    All four Versatis handsets share the same 2.4V two-cell NiMH pack format, the same connector orientation, and the same base station charging circuit. One battery fits all four models because the voltage rail and physical footprint are identical across the range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the Versatis base station charging circuit and confirmed the BMS accepted the cell without triggering a charging fault. Voltage at full charge measured 2.8V, within the expected range for a two-cell NiMH pack.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base for a continuous 16-hour charge before first use. NiMH cordless phone cells need this slow initial charge to reach rated capacity — cutting it short leaves the pack at 60–70% of its 600mAh rating from the outset.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells ship in a partially discharged state and need three to five full charge-discharge cycles before they reach rated capacity. A new pack in a Versatis handset will feel weak for the first few days of normal use — this is chemistry, not a faulty cell. Run the handset until the low-battery tone sounds, then return it to the base for a full charge. Repeat this three to five times and talk time will stabilise at the full 600mAh level.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge or flashes an error light on a new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells stored before sale can drop to a voltage level that the Versatis base station's charge controller reads as a fault condition rather than a dischargeable pack. The base expects to see a cell above roughly 1.8V total before it enters normal charge mode. If the charge LED flashes or stays off, remove the handset, wait 10 seconds, and reseat it firmly — this re-triggers the charge detect cycle. If the error persists, a short trickle charge using a standalone NiMH charger at 60mA for 30 minutes is enough to lift the pack voltage above the base station's acceptance threshold.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339991777370,"sku":"BWCS-BTB500CL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339991810138,"sku":"BWCS-BTB500CL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339991842906,"sku":"BWCS-BTB500CL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BTB500CL-1.webp?v=1778366983","url":"https:\/\/batteryweb.com\/products\/alcatel-versatis-50-replacement-battery-24v-600mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}