{"product_id":"alinco-dj-s41-replacement-battery-36v-700mah-ni-mh","title":"Alinco DJ-S41 EBP-25N Compatible Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAlinco DJ-S41 \/ PMR446 \/ DJ-SR1 — 3.6V Ni-MH Replacement Battery (EBP-25N)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V 700mAh Ni-MH replacement for the Alinco EBP-25N battery pack. It fits the DJ-S41, PMR446, and DJ-SR1 handheld transceivers. Slot it into the existing battery bay — the housing matches the OEM footprint at 45.25 × 31.29 × 11.00mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDJ-S41 \/ PMR446 \/ DJ-SR1 platform fit:\u003c\/strong\u003e\n    All three models share the same 3.6V battery bay, connector pinout, and contact strip layout. One pack covers the entire group without adapters or modifications.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through transmit and receive loads on the DJ-S41. The BMS handled the PTT current spike cleanly and did not trip on a standard voice transmission burst.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge on Ni-MH after swap:\u003c\/strong\u003e\n    Ni-MH cells ship at partial charge — do not treat a low bar reading as a fault. Place the pack in the Alinco dock immediately after installation and run a full charge cycle before the first transmission. The dock needs a complete charge pass to calibrate its termination cutoff to the new cells.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the DJ-S41 cuts out mid-transmission on a freshly inserted EBP-25N\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells at storage voltage sit around 1.1–1.15V per cell. Under PTT load, that drops fast enough for the radio's low-voltage cutoff circuit to interrupt TX before the transmission ends. This is not a faulty pack — it is an under-charged pack. A full dock charge brings each cell to roughly 1.4V at termination, which gives the voltage headroom the radio needs to sustain transmit current without dropping out.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBar indicator stuck on one bar after fitting a new EBP-25N\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe DJ-S41 reads battery level by sampling terminal voltage against fixed thresholds. A new Ni-MH pack at storage charge sits below the threshold for the second bar, so the indicator shows one bar even though the cell is not depleted. This is a voltage state issue, not a capacity issue. Put the pack on charge in the Alinco dock until the charge LED goes green, then power the radio on — the bar indicator should move to full at or above 3.6V resting voltage.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426366619738,"sku":"BWCS-ALP25TW-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426366652506,"sku":"BWCS-ALP25TW-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426366685274,"sku":"BWCS-ALP25TW-3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ALP25TW-1.webp?v=1779930807","url":"https:\/\/batteryweb.com\/products\/alinco-dj-s41-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}