{"product_id":"aluratek-cdm530am-3g-replacement-battery-37v-1800mah-li-ion","title":"Aluratek CDM530AM-3G Replacement Battery 3.7V 1800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAluratek CDM530AM-3G — 3.7V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 1800mAh Li-ion battery replaces the original cell in the Aluratek CDM530AM-3G mobile hotspot. It fits directly into that unit and restores the hotspot's ability to create a wireless network for connected devices. No OEM part number exists for this cell — the CDM530AM-3G is the sole confirmed compatible model.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCDM530AM-3G fit:\u003c\/strong\u003e\n    The CDM530AM-3G runs a single-cell 3.7V architecture with a dedicated BMS that monitors cell voltage and temperature. This replacement matches that voltage rail and physical footprint — 52.76 × 35.35 × 11.16mm — so the BMS handshake completes without error codes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell under a combined modem-plus-Wi-Fi load profile. The BMS held the low-voltage cutoff at 3.0V and triggered protection correctly on thermal stress. No false shutdowns occurred at nominal draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eVentilation during extended sessions:\u003c\/strong\u003e\n    Keep the hotspot on a hard, open surface when running multiple connected devices. The cellular radio runs at full output power in weak signal areas, and heat from the radio transfers directly into the battery cavity — trapping that heat accelerates cell wear faster than normal cycling would.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the CDM530AM-3G drops connections mid-session on a new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen several devices connect simultaneously, the modem and Wi-Fi radio draw current at the same time. A single 1800mAh cell has a finite discharge curve, and the combined load can pull cell voltage below the BMS trip threshold momentarily — enough for the BMS to interrupt output and reset the radio stack. This looks like a Wi-Fi dropout to every connected device. Reducing the number of active connections or moving the hotspot closer to the cellular tower lowers the instantaneous current demand and keeps cell voltage above the 3.2V sag threshold.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eHotspot shows battery inserted but will not boot after sitting unused\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLithium-ion cells self-discharge at roughly 2–3% per month. A hotspot left in a drawer for several months can have a cell voltage below 3.0V — the minimum the BMS requires to allow the device to power on. The BMS locks output to protect the cell from damage at deep discharge. Connect the hotspot to a charger and leave it for 15–20 minutes before attempting to power on; most chargers will trickle charge the cell back above 3.0V and the BMS will release the lock.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377889640538,"sku":"BWCS-EX6210RC-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377889673306,"sku":"BWCS-EX6210RC-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377889706074,"sku":"BWCS-EX6210RC-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-EX6210RC-1.webp?v=1778773918","url":"https:\/\/batteryweb.com\/products\/aluratek-cdm530am-3g-replacement-battery-37v-1800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}