{"product_id":"amazon-kindle-touch-replacement-battery-37v-1400mah-li-polymer","title":"DR-A014 Amazon Kindle Touch Replacement Battery 3.7V 1400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAmazon Kindle Touch D01200 — 3.7V Li-Polymer Replacement Battery (DR-A014)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 1400mAh Li-Polymer battery for the Amazon Kindle Touch e-reader (model D01200). It replaces OEM part numbers DR-A014, 170-1056-00, S2011-002-A, S2011-002-S, and MC-354775. If your Kindle Touch no longer holds a charge or fails to power on, this cell is a direct swap for the original.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eKindle Touch compatibility:\u003c\/strong\u003e\n    The D01200 and Kindle Touch 4th generation share the same battery footprint, connector, and 3.7V nominal voltage rail. One cell fits both. No adapter or modification needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell on a Kindle Touch D01200 unit and confirmed the BMS accepted the new cell without fault flags. Charge acceptance was normal from the first USB session.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap charge cycle:\u003c\/strong\u003e\n    After installing this cell, run a full USB charge before powering on the device. The Kindle Touch firmware recalibrates its battery percentage display against a full-capacity baseline — skipping this step causes the gauge to read inaccurately for several cycles.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eKindle Touch not powering on after battery swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eReplacement Li-Polymer cells typically ship at storage voltage — around 3.6V or lower. The Kindle Touch firmware requires a minimum boot threshold to initialise the e-ink display controller. If the cell voltage sits below that threshold, the device will not respond to the power button. Connect a USB charger immediately after installation and leave it for at least 10 minutes before pressing power. The device should show a charging indicator on-screen at that point.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping or reading 0% right after a new cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Kindle Touch tracks battery state using a coulomb counter calibrated to the original cell's discharge curve. A new cell resets that reference. Until the firmware completes a full charge-to-discharge cycle, the percentage reading will jump, drop suddenly, or show 0% despite the device running normally. Complete one full charge to 100%, then use the device until it powers off from low battery. After that cycle, the gauge stabilises. No hardware fault is present.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360262258778,"sku":"BWCS-ABD014SL-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360262291546,"sku":"BWCS-ABD014SL-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360262324314,"sku":"BWCS-ABD014SL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ABD014SL-1.webp?v=1778610980","url":"https:\/\/batteryweb.com\/products\/amazon-kindle-touch-replacement-battery-37v-1400mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}