{"product_id":"american-dj-mega-go-par64-rgba-replacement-battery-111v-10200mah-li-ion","title":"American DJ Z-MEB236 Mega Go PAR64 Compatible Battery 11.1V 10200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAmerican DJ Mega Go PAR64 RGBA — 11.1V Li-ion Replacement Battery (Z-MEB236)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 11.1V 10200mAh Li-ion battery replaces the OEM pack in the American DJ Mega Go PAR64 RGBA and Jelly Go PAR64 RGBA portable LED fixtures. Both fixtures run the same battery platform — same voltage rail, same connector, same BMS handshake. Capacity is rated at 113.22Wh from the factory-spec cell configuration.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMega Go and Jelly Go PAR64 RGBA compatibility:\u003c\/strong\u003e\n    Both fixtures share the Z-MEB236 battery platform. The 11.1V nominal rail, physical connector, and BMS communication protocol are identical across both models, so one replacement covers either fixture without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through full charge and discharge cycles on the PAR64 RGBA fixture. The BMS handled constant-current LED driver load without tripping, and cell balancing completed normally at end-of-charge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eStorage charge for event fixtures:\u003c\/strong\u003e\n    Store this battery at approximately 50% state of charge if the fixture will sit unused for more than two weeks. Full-charge storage in a warm venue bag or flight case accelerates capacity fade in the high-capacity cells used in this pack.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLight dimming before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe PAR64 RGBA's LED driver runs in constant-current mode, which pulls harder on the cells as voltage drops. When cell voltage sags under that sustained draw, the fixture dims output before the onboard indicator triggers a low-battery warning. This is voltage sag, not a faulty indicator. A battery with degraded cells will show this earlier in the discharge cycle than a fresh pack. If dimming starts well before the indicator, swap the battery and check the old pack's resting voltage — anything below 9.9V at rest indicates cell wear.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFixture shows an error code or won't accept battery after extended storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf a battery has sat discharged for several weeks, individual cells can fall below the acceptance threshold the fixture's ballast firmware checks on power-up. The BMS on the battery itself may also enter a protection state and block output entirely. To recover, connect the battery to a compatible Li-ion charger and apply a low-current charge for 15–30 minutes before reinserting it into the fixture. If the fixture still throws an error after that, power-cycle the unit with the battery seated — most ballast firmware clears the fault flag on a clean boot once cell voltage reads above 10.5V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381323464794,"sku":"BWCS-AMB236XL-1","price":100.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381323497562,"sku":"BWCS-AMB236XL-2","price":118.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381323530330,"sku":"BWCS-AMB236XL-3","price":131.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-AMB236XL-1.webp?v=1778899987","url":"https:\/\/batteryweb.com\/products\/american-dj-mega-go-par64-rgba-replacement-battery-111v-10200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}