{"product_id":"amica-vm-9001-replacement-battery-252v-2000mah-li-ion","title":"AMICA VM 9001 Replacement Battery 25.2V 2000mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAMICA VM 9001 — 25.2V Li-ion Replacement Battery (1047672)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 25.2V 2000mAh Li-ion battery pack replaces the original power cell in the AMICA VM 9001 cordless vacuum cleaner. It matches the OEM voltage, capacity, and connector configuration for the VM 9001 stick and handheld vacuum platform. Capacity is rated at 50.4Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVM 9001 platform fit:\u003c\/strong\u003e\n    The VM 9001 runs a 25.2V cell configuration that matches a specific connector pinout and BMS communication line. Substituting a generic 24V or 22.2V pack will trigger a voltage-mismatch fault — the motor controller will not spin the brush roll.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through full charge and discharge on the VM 9001 platform. The BMS handshake cleared without fault codes, and the motor controller accepted the cell stack at full draw during both carpet and bare-floor suction modes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging on the VM 9001:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. Continuous dock contact keeps the cells in a trickle-charge state that accelerates capacity fade. Charge to full, then remove the unit from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when a blocked filter forces the motor to draw more current than rated, causing cell voltage to sag under load even though stored charge reads normal. The BMS reads pack voltage — not filter restriction — so the indicator stays green while suction output is already falling. Clean or replace the filter first. If suction recovers to full strength after a filter clean, the battery is not the cause. A genuinely aged cell will sag even on a clean filter and typically drops below 22V under full motor load.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-clean then restarts after a pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a flat battery. When airflow is restricted — partial blockage in the wand, a saturated filter, or a tangled brush roll — motor draw spikes past the BMS overcurrent threshold and the pack disconnects to protect the cells. The BMS resets after a short thermal cooldown, which is why the vacuum restarts after you pause. Clear the blockage and check the filter before suspecting the battery. If the cutout repeats on a clean, unobstructed machine, measure pack voltage at rest — a healthy 25.2V cell stack should read between 24.5V and 25.2V when fully charged.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426478587994,"sku":"BWCS-AMV901VX-1","price":410.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426478620762,"sku":"BWCS-AMV901VX-2","price":490.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426478653530,"sku":"BWCS-AMV901VX-3","price":550.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-AMV901VX-1.webp?v=1779933372","url":"https:\/\/batteryweb.com\/products\/amica-vm-9001-replacement-battery-252v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}