{"product_id":"anker-powerconf-usb-c-conference-speaker-replacement-battery-37v-5200mah-li-ion","title":"Anker PowerConf 3.7V 5200mAh Replacement Battery 539028","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAnker PowerConf USB-C Conference Speaker — 3.7V Li-ion Replacement Battery (539028)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 5200mAh Li-ion replacement battery for the Anker PowerConf USB-C Conference Speaker, covering models A3301011 and A3305. It restores the speaker's portable battery operation when the original cell degrades or fails. Voltage and capacity match the OEM specification exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eA3301011 and A3305 compatibility:\u003c\/strong\u003e\n    Both variants run the same 3.7V single-cell architecture with the OEM part number 539028. The BMS handshake, connector pinout, and physical cell dimensions are identical across these two SKUs, so one replacement covers the full A3300-series line.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the A3305 platform. The BMS accepted the pack without fault codes, balanced correctly to 4.2V at full charge, and held the voltage rail steady under combined speaker and USB-C peripheral draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-session calibration tip:\u003c\/strong\u003e\n    After installation, run a complete charge to 100% before the first meeting. The PowerConf maps battery state against voltage thresholds during normal operation — a new cell needs one full cycle for the indicator to read accurately. Skipping this step often causes the LED to report a false low-battery warning mid-session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the PowerConf won't power on after a battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eReplacement cells shipped in storage mode often arrive below 3.0V — below the BMS re-enable threshold on the A3305 platform. When the unit sees a pack at that voltage, it refuses to boot rather than risk over-discharging a cell it cannot verify. Plug the speaker directly into a USB-C charger for at least 15 minutes before pressing the power button. The BMS needs enough charge to exit lockout before the main board will initialise. If the unit still does not power on after that initial charge, check that the connector is fully seated — the 539028 pack uses a locking tab that can appear clicked in without making full electrical contact.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery indicator showing wrong level after installation\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe PowerConf does not use a fuel-gauge IC — it infers charge state from cell voltage at rest and under load. A fresh replacement cell has a different internal resistance profile than the aged cell the firmware last calibrated against, so the indicator can read 20–30% low or high for the first session. Run the unit from a full charge down to automatic shutdown, then recharge fully without interruption. After that single cycle the voltage-to-percentage mapping resets and the indicator stabilises. Do not judge the replacement cell's capacity from the first session readout.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339856543834,"sku":"BWCS-AKC330SL-1","price":38.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339856576602,"sku":"BWCS-AKC330SL-2","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339856609370,"sku":"BWCS-AKC330SL-3","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-AKC330SL-1.webp?v=1778366843","url":"https:\/\/batteryweb.com\/products\/anker-powerconf-usb-c-conference-speaker-replacement-battery-37v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}