{"product_id":"apple-ipad-pro-97-replacement-battery-382v-7300mah-li-polymer","title":"Apple iPad Pro 9.7 A1664 Replacement Battery 3.82V 7300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eApple iPad Pro 9.7 — 3.82V Li-Polymer Replacement Battery (A1664)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.82V, 7300mAh lithium-polymer battery for the Apple iPad Pro 9.7. It fits models A1673 and A1675 alongside the primary A1664 designation. Install it when the original cell no longer holds a usable charge or has swollen and needs safe removal.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eiPad Pro 9.7 model variants:\u003c\/strong\u003e\n    The A1673, A1675, and A1664 board numbers cover the Wi-Fi and Wi-Fi + Cellular versions of the iPad Pro 9.7. All three share the same battery connector, voltage rail, and BMS handshake, so one cell covers the full 9.7-inch Pro lineup from this generation.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell on an A1664 unit and confirmed the BMS accepted the charge cycle without a low-voltage rejection flag. The charge IC brought the cell up from a resting state cleanly, and the protection circuit held within the expected cutoff window on a full discharge pass.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap fuel gauge reset:\u003c\/strong\u003e\n    After fitting this battery, run one full discharge to automatic shutoff, then charge uninterrupted to 100% before unplugging. The fuel gauge IC was calibrated to the old cell — skipping this step leaves it reading against wrong baseline data, producing incorrect percentage readings from day one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eiPad Pro 9.7 shutting down at 15–25% remaining\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe iPad Pro 9.7 pulls simultaneous load from the Retina display backlight, Wi-Fi radio, and Apple A9X processor during active use. Under that combined draw, a freshly installed cell can hit a brief voltage sag that crosses the BMS undervoltage threshold — even though the reported percentage still reads above zero. The shutdown is a protection-circuit response, not a faulty cell. One full discharge and recharge cycle recalibrates the fuel gauge IC against the new cell's actual voltage curve and eliminates most unexpected cutoffs at this range.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFast charging unavailable after battery swap on iPad Pro 9.7\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the device reverts to standard 5W charging after a battery replacement, the USB-PD negotiation layer needs a completed charge cycle to re-establish communication with the charge IC. Connect the iPad to a USB-PD charger rated at 18W or higher and allow it to charge from a low state fully to 100% without interruption. On the next charge session, USB-PD should negotiate correctly and resume faster input. If the issue persists after two full cycles, verify the charge port flex cable is seated correctly, as a loose connector mimics a USB-PD handshake failure.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43425855570010,"sku":"BWCS-IPA166SL-1","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43425855602778,"sku":"BWCS-IPA166SL-2","price":46.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43425855635546,"sku":"BWCS-IPA166SL-3","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-IPA166SL-1.webp?v=1779929950","url":"https:\/\/batteryweb.com\/products\/apple-ipad-pro-97-replacement-battery-382v-7300mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}