{"product_id":"apple-watch-2-42mm-replacement-battery-38v-300mah-li-polymer","title":"Apple Watch Series 2 42mm A1761 Replacement Battery 3.8V","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eApple Watch Series 2 42mm — 3.8V Li-Polymer Replacement Battery (A1761)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.8V, 300mAh Li-Polymer cell replaces the original A1761 battery in the Apple Watch Series 2 42mm (models A1758 and A1817). It restores power to the display, processor, heart rate sensor, and Bluetooth radio. Fit this cell when the original has degraded past its useful cycle count and the watch can no longer hold a full charge through a typical day.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eA1758 and A1817 compatibility:\u003c\/strong\u003e\n    Both Watch Series 2 42mm variants share the same battery bay dimensions, connector pinout, and BMS handshake protocol. The A1761 part number covers both casings — no adapter or modification needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through a full charge cycle on a Series 2 42mm unit. The BMS accepted the cell without error flags, the fuel gauge IC initialised correctly, and the watch completed a full charge to 100% without thermal or voltage anomalies.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap charging requirement:\u003c\/strong\u003e\n    After fitting the new cell, place the watch on its magnetic charger immediately and charge to 100% before first use. The fuel gauge IC on this platform loses its reference point during a cell swap and cannot recalibrate without a full charge cycle from near-zero. Skipping this step causes the watch to report inaccurate battery percentages.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Series 2 42mm battery drains in under a day after a cell swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new cell has a different internal impedance profile than the aged cell it replaced. The Series 2 power management IC takes several charge-discharge cycles to learn the new cell's characteristics and adjust draw scheduling accordingly. During this break-in period, always-on sensor polling and Bluetooth keep-alive packets can pull more current than the IC expects, accelerating apparent drain. Run three full charge cycles before judging the cell's real-world performance.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMagnetic charger not registering contact after reassembly\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Series 2 42mm charging contacts sit flush with the caseback and rely on precise alignment with the magnetic puck. If the caseback shifts even slightly during reassembly, the puck seats magnetically but the electrical contacts miss. Remove the charger, press the caseback firmly until you hear the adhesive seat, then re-align the charger puck. If the charging icon still does not appear, check that no adhesive residue is bridging the contact pads — clean with isopropyl alcohol and retry.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416173641818,"sku":"BWCS-IPW761SH-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416173674586,"sku":"BWCS-IPW761SH-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416173707354,"sku":"BWCS-IPW761SH-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-IPW761SH-1.webp?v=1779760548","url":"https:\/\/batteryweb.com\/products\/apple-watch-2-42mm-replacement-battery-38v-300mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}