{"product_id":"aps-bc1071-replacement-battery-74v-3400mah-li-ion","title":"APS BC1071 Survey Equipment Replacement Battery 7.4V 3400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAPS BC1071 — 7.4V Li-ion Replacement Battery (29518)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 3400mAh lithium-ion replacement battery for the APS BC1071 handheld survey instrument. It fits field data collection and site measurement devices that use OEM part numbers 29518, 38403, 46607, 52030, C8872A, or EI-D-LI1. Physical dimensions are 70.35 × 38.50 × 20.65mm — confirm these match your battery compartment before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBC1071 platform compatibility:\u003c\/strong\u003e\n    All listed OEM part numbers share the same 7.4V nominal voltage rail, connector pinout, and BMS handshake protocol on the BC1071 platform. Swapping between these part numbers across units does not require firmware or hardware changes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through probe initialisation and sustained sensor logging loads on the bench. The BMS held voltage without tripping during the current spike at sensor power-up, and cell balance stayed within spec across discharge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eCalibration cycle before first field use:\u003c\/strong\u003e\n    After installing, run a full calibration cycle through the BC1071 instrument menu before taking it into the field. The instrument maps battery state during calibration — skipping this step causes premature low-battery warnings during your first measurement session, even with a fully charged pack.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout after the BC1071 sat unused in a carry case for months\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eLithium-ion cells self-discharge slowly during storage. If the BC1071 sat unused long enough, the pack voltage can drop below the BMS recovery threshold — typically around 2.5V per cell on a 7.4V (2S) pack, or 5.0V total. At that point the BMS enters a protection lockout and the instrument will not power on, and the charger may show no activity. To recover the pack, place it on the OEM charger and leave it connected for 30–60 minutes without interruption — many chargers apply a low-current pre-charge pulse that nudges the cells above the lockout threshold before resuming normal charge. If the charger shows no response after 60 minutes, the cells have likely dropped below safe recovery voltage.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBC1071 shutting down mid-logging session with no low-battery warning\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSustained sensor load during a logging session draws more current than idle or single-measurement use. If cell impedance has risen — through age or deep discharge cycles — voltage sags under that load and can dip below the BMS cutoff threshold momentarily, triggering an abrupt shutdown. The instrument gives no warning because the voltage drop is fast, not gradual. Check resting pack voltage after shutdown: if it reads above 7.0V within a few minutes of the cutoff, impedance-related sag is the likely cause, not low charge state.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360758857818,"sku":"BWCS-LI1HL-1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360758890586,"sku":"BWCS-LI1HL-2","price":42.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360758923354,"sku":"BWCS-LI1HL-3","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-LI1HL-1.webp?v=1778616259","url":"https:\/\/batteryweb.com\/products\/aps-bc1071-replacement-battery-74v-3400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}