{"product_id":"arcon-e-pack-s-replacement-battery-36v-2000mah-ni-mh","title":"Arcon E-pack S Crane Remote Ni-MH Compatible Battery 3.6V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eArcon E-pack S — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 2000mAh Ni-MH replacement battery for the Arcon E-pack S crane remote control. It fits the handheld transmitter unit used to operate overhead cranes and hoists in industrial environments. Swap it in when the original cell can no longer hold a working charge.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eE-pack S transmitter fit:\u003c\/strong\u003e\n    The E-pack S uses a 3.6V Ni-MH cell pack at this specific form factor — 60.20 x 54.55 x 22.20mm. The transmitter's internal regulator and charge circuit are matched to Ni-MH chemistry, so the voltage profile during charge and discharge aligns correctly with what the remote expects.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through repeated solenoid-activation sequences on the bench. The battery held voltage above the remote's cutoff threshold across sustained button-press loads, and the charge circuit terminated correctly at full capacity.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eCrane remote storage charging:\u003c\/strong\u003e\n    If the E-pack S remote sits unused for more than four weeks, connect it to the charger for a full cycle before returning it to service. Ni-MH cells in low-drain standby devices lose capacity through self-discharge, and the remote may signal low battery immediately on power-on if the cell has drifted too far down.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePower dropout during solenoid or relay activation on the E-pack S\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you press a crane direction button, the remote fires a solenoid command through the receiver — that activation draws a short inrush current spike. A degraded or partially discharged Ni-MH cell can sag enough under that spike to drop the transmitter voltage below its operating floor. The remote resets or cuts out for a moment, even though it appeared charged. A fully charged, capacity-rated cell handles the inrush without voltage sag that trips the cutoff.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eE-pack S remote showing low battery immediately after fitting a new cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eReplacement Ni-MH cells ship at storage voltage — typically around 1.0–1.1V per cell, which puts a 3.6V three-cell pack well below operating level. The E-pack S reads this as low battery the moment you power on. This is not a fault with the battery or the remote. Charge the battery fully in the remote's cradle or external charger before first use, and the low-battery indication will clear once cells reach their nominal 1.2V per cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360069451866,"sku":"BWCS-HTR620BL-1","price":30.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360069484634,"sku":"BWCS-HTR620BL-2","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360069517402,"sku":"BWCS-HTR620BL-3","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-HTR620BL-1.webp?v=1778610752","url":"https:\/\/batteryweb.com\/products\/arcon-e-pack-s-replacement-battery-36v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}