{"product_id":"ariete-briciola-27111-replacement-battery-148v-2600mah-li-ion","title":"Ariete Briciola 2711\/1 Compatible Battery 14.8V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAriete Briciola 2711\/1 — 14.8V Li-ion Replacement Battery (UR1860ZT-4S1P-AAF)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 14.8V 2600mAh lithium-ion battery replaces the original pack in the Ariete Briciola 2711\/1 and 2717\/1 cordless vacuums, as well as the Profimaster 2712\/1 and 2712\/2. It slots into the same bay as the factory cell and connects through the same BMS interface. Capacity is 2600mAh (38.48Wh) — matched to product data, not inflated.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBriciola and Profimaster platform fit:\u003c\/strong\u003e\n    These models share a 14.8V 4S cell configuration and the same physical bay dimensions (69.80 × 36.90 × 36.70mm). The BMS handshake protocol is consistent across the Briciola and Profimaster lines, so one battery covers the full range without pin or voltage rail differences.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through repeated motor-start loads and monitored BMS response under sustained draw. The protection circuit held at rated thresholds — no false overcurrent trips during normal suction cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging behaviour on these vacuums:\u003c\/strong\u003e\n    Do not leave the Briciola sitting on the dock permanently. These vacuums trickle-charge when left docked after a full charge, and that continuous low-current input degrades cell capacity faster than standard use. Charge to full, then remove from the dock.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator shows low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eOn the Briciola 2711\/1, the motor draws harder when the filter is even partially restricted — well before the vacuum reaches what most users consider \"dirty.\" That elevated draw causes the cell voltage to sag under load, and suction weakens noticeably while the indicator still reads mid-range. The battery is not failing in this case; it is responding correctly to a motor pulling above its normal current ceiling. Clean the filter and check for debris in the cyclone chamber before assuming the battery is at fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a short pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When airflow is restricted — blocked filter, sealed nozzle, or a rug pile jamming the intake — the motor spikes current draw past the protection circuit's threshold. The BMS cuts power to protect the cells, then resets after the pack cools or current normalises. Clear the blockage completely, then restart the vacuum. If the cutout happens again on an unobstructed floor, check that the replacement pack voltage reads above 14.0V on a multimeter before concluding there is a deeper fault.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428002889818,"sku":"BWCS-ZCA400VX-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428002922586,"sku":"BWCS-ZCA400VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428002955354,"sku":"BWCS-ZCA400VX-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ZCA400VX-1.webp?v=1779933756","url":"https:\/\/batteryweb.com\/products\/ariete-briciola-27111-replacement-battery-148v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}