{"product_id":"asus-memo-pad-hd-7-replacement-battery-38v-3900mah-li-polymer","title":"Asus MeMO Pad HD 7 C11P1311 Replacement Battery 3.8V 3900mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAsus MeMO Pad HD 7 ME175KG \/ ME715 — 3.8V Li-Polymer Replacement Battery (C11P1311)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.8V, 3900mAh lithium-polymer battery replaces the C11P1311 (also listed as 0B200-00710000) in the Asus MeMO Pad HD 7 tablet, covering models ME715, ME175KG, and K00S among others. It fits the original cell footprint at 93.87 × 90.52 × 3.32mm. Capacity matches the factory spec at 14.82Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eME175KG and K00S compatibility:\u003c\/strong\u003e\n    These models share the same 3.8V power rail, connector pinout, and BMS handshake protocol as the ME715. One cell covers all listed variants without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the MeMO Pad HD 7 platform. The BMS accepted the new cell without fault flags, and the charge IC completed a full cycle without thermal events.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration after swap:\u003c\/strong\u003e\n    After installation, run the tablet down to automatic shutoff, then charge uninterrupted to 100%. This single full cycle resets the fuel gauge IC against the new cell's actual voltage curve and clears the percentage drift that almost always appears after a battery replacement on this tablet.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMeMO Pad HD 7 shutting down at 15–25% battery remaining\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the fuel gauge IC is still calibrated to the old cell's degraded voltage curve. The new cell hits a different voltage at 20% state of charge than the old one did, and the tablet interprets this as a low-voltage cutoff. The display backlight combined with active WiFi creates a combined load spike that accelerates this. Run one full discharge to automatic shutoff, then charge to 100% without interruption — after that cycle the reported percentage tracks correctly.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFast charging not available after battery replacement on the MeMO Pad HD 7\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSome users see the tablet default to slow charging after a swap, even with the original charger. The charge IC on the MeMO Pad HD 7 runs a negotiation handshake with the battery BMS at the start of each charge session. On a fresh cell, this handshake sometimes fails on the first attempt and the IC falls back to a conservative charge rate. This is not a fault with the replacement cell. Disconnect the charger, wait 30 seconds, and reconnect — most units accept the full charge rate on the second attempt. If it persists, complete one full charge cycle and the negotiation stabilises.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426003419226,"sku":"BWCS-AUM715SL-1","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426003451994,"sku":"BWCS-AUM715SL-2","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426003484762,"sku":"BWCS-AUM715SL-3","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-AUM715SL-1.webp?v=1779930196","url":"https:\/\/batteryweb.com\/products\/asus-memo-pad-hd-7-replacement-battery-38v-3900mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}