{"product_id":"asus-mypal-a716-replacement-battery-37v-1500mah-li-ion","title":"Asus MyPal A716 Replacement Battery 3.7V 1500mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAsus MyPal A716 — 3.7V Li-ion Replacement Battery (A716\/MBT)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 1500mAh Li-ion battery replaces the original cell in the Asus MyPal A716 pocket PC. It fits the A716 directly using the OEM part number A716\/MBT. Voltage and capacity match the original specification — 3.7V nominal, 5.55Wh total.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMyPal A716 fit:\u003c\/strong\u003e\n    The A716 uses a fixed battery bay with a single flat connector. This replacement matches that connector pinout and the BMS voltage thresholds the A716's charging circuit expects. No modification needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on the A716 platform. The BMS reported correct voltage at each stage and the device registered a full charge without error flags.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eRAM data protection before swap:\u003c\/strong\u003e\n    The A716 stores active application state and open files in SRAM powered directly by the main battery. Sync all data to the host PC using ActiveSync before removing the battery — cutting power without syncing will wipe whatever is held in RAM at that moment.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the MyPal A716 won't complete its boot sequence after a new battery is fitted\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe A716 boot ROM runs a voltage check before loading the OS. If the replacement cell ships partially discharged — common with stored Li-ion — the device may freeze at the Asus splash screen or refuse to power on at all. This is a low-voltage cutoff, not a fault with the battery or device. Charge the new cell for at least two hours before the first boot attempt. The device should power on normally once the cell reaches approximately 3.6V or above.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMyPal A716 showing full charge but losing power faster than expected\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe A716's wireless sync radio and backlight together draw significantly more current than standby mode. If the battery indicator reads full but the device shuts down sooner than the original cell did, check whether Wi-Fi or Bluetooth is active during use — both are high-drain features on this platform. A degraded original cell can also skew the charge indicator because the A716 calibrates its gauge against the battery's internal resistance over time. After fitting a new cell, run two full charge-to-discharge cycles to let the gauge recalibrate to 3.7V nominal.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415954030682,"sku":"BWCS-A716SL-1","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415954063450,"sku":"BWCS-A716SL-2","price":32.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415954096218,"sku":"BWCS-A716SL-3","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-A716SL-1.webp?v=1779758425","url":"https:\/\/batteryweb.com\/products\/asus-mypal-a716-replacement-battery-37v-1500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}