{"product_id":"att-replacement-battery-24v-1500mah-ni-mh","title":"AT\u0026T STB-513 Cordless Phone Replacement Battery 2.4V 1500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAT\u0026amp;T STB-513 — 2.4V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 1500mAh Ni-MH replacement battery for AT\u0026amp;T cordless phones that use the STB-513 part number. It slots into the handset and restores talk time and standby performance lost to a degraded original pack. Voltage and cell chemistry match the OEM spec exactly.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSTB-513 platform fit:\u003c\/strong\u003e\n    AT\u0026amp;T handsets in this series share a common 2.4V two-cell Ni-MH architecture with the same connector orientation and physical footprint. Any model specifying the STB-513 part number draws from the same voltage rail and BMS profile, so one replacement pack covers the full range.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a DECT handset platform. The base station accepted the charge handshake immediately, and the BMS held voltage steady across the RF transmit bursts without triggering a low-voltage cutoff.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells in cordless phones arrive partially discharged from storage — a slow, uninterrupted first charge lets each cell reach rated capacity and sets the baseline for all subsequent cycles.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than the original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells do not deliver rated capacity straight out of the box. For the first three to five charge-discharge cycles, available capacity runs noticeably lower than the 1500mAh spec. This is normal cell conditioning, not a fault with the pack. Each full cycle allows the electrolyte to distribute evenly across the plates, and capacity steps up incrementally until it stabilises at the rated figure around cycle five.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge or error light after inserting new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH packs that have sat in storage can drop to a voltage the base station's charge controller reads as out-of-range, so the base refuses to initiate a charge cycle. Remove the handset, wait 30 seconds, then reseat it firmly — full contact on the charging pins is required for the controller to detect the pack. If the error persists, a short trickle charge from a compatible external charger at 50–100mA can bring the cell voltage up to the 2.0V threshold the base needs to accept the pack and begin normal charging.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340085985370,"sku":"BWCS-P513CL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340086018138,"sku":"BWCS-P513CL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340086050906,"sku":"BWCS-P513CL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-P513CL-1.webp?v=1778367047","url":"https:\/\/batteryweb.com\/products\/att-replacement-battery-24v-1500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}