{"product_id":"att-unite-explore-replacement-battery-38v-4300mah-li-ion","title":"AT\u0026T Unite Explore Replacement Battery 3.8V 4300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAT\u0026amp;T Unite Explore \/ Unite Explore Rugged — 3.8V Li-ion Replacement Battery (308-10013-01)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.8V, 4300mAh Li-ion battery replaces the original cell in the AT\u0026amp;T Unite Explore and Unite Explore Rugged mobile hotspots. Both devices share the same battery bay, connector, and BMS handshake protocol. Capacity figure is 4300mAh as specified in the product data — do not rely on third-party listings that cite different numbers.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUnite Explore and Explore Rugged compatibility:\u003c\/strong\u003e\n    Both variants run on the same 3.8V rail and use an identical physical connector with the same BMS communication lines. One battery covers both housings — the Rugged adds an outer shell, not a different battery format.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell under combined modem and Wi-Fi load — simultaneously active cellular radio and multiple client connections. The BMS held the voltage rail steady and did not trigger a protective cutoff at peak draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eVentilation during extended sessions:\u003c\/strong\u003e\n    Keep the hotspot on a hard, flat surface rather than a pocket or bag when running extended sessions. When connected clients are far from the device, the cellular radio runs at maximum output power. That sustained RF load generates heat that accumulates against the battery if airflow is blocked.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMobile hotspot dropping connected devices mid-session on a new battery\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe Unite Explore runs two power-hungry subsystems simultaneously — the cellular modem and the Wi-Fi radio. At maximum client connections, the combined draw can cause a brief voltage sag on a battery with high internal resistance. The BMS reads that sag as a fault condition and cuts output to protect the cell, which the hotspot firmware interprets as a power failure — dropping all clients. A new cell with low internal resistance handles the surge without sag, so the BMS stays passive. If drop-outs persist after fitting this battery, check that the device firmware is current, as older builds have aggressive BMS trip thresholds.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eUnite Explore not powering on after sitting in a drawer for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge at roughly 1–3% per month even with no load. After several months in storage, the Unite Explore battery can fall below the minimum boot voltage the firmware requires to initialise — typically around 3.0V per cell. The device shows nothing when the power button is pressed because the BMS blocks output below that floor to prevent cell damage. Connect the hotspot to its charger for at least 30 minutes before attempting to power on; this brings the cell above 3.2V, which is enough for the BMS to release the output and allow the firmware to boot.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43377832919130,"sku":"BWCS-PTR791SL-1","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43377832951898,"sku":"BWCS-PTR791SL-2","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43377832984666,"sku":"BWCS-PTR791SL-3","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-PTR791SL-1.webp?v=1778773880","url":"https:\/\/batteryweb.com\/products\/att-unite-explore-replacement-battery-38v-4300mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}