{"product_id":"avvio-792-replacement-battery-37v-2000mah-li-ion","title":"Avvio 792 Compatible Battery 3.7V 2000mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eAvvio 792 — 3.7V Li-ion 2000mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.7V, 2000mAh lithium-ion replacement cell for the Avvio 792 smartphone. It slots into the same battery bay as the original and connects via the stock connector. Capacity is 2000mAh — the same rated figure as the factory cell.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAvvio 792 fitment:\u003c\/strong\u003e\n    The 792 runs a single-cell 3.7V architecture with fixed connector placement and a battery bay sized to 70.18 × 60.00 × 4.67mm. This cell matches those dimensions and voltage rail exactly, so the charge IC sees a compatible source from the first boot.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on a 3.7V single-cell test rig. The BMS held charge cutoff at the expected 4.2V ceiling and discharge cutoff triggered cleanly before voltage collapsed — no erratic shutdowns during the test sequence.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFuel gauge recalibration on first use:\u003c\/strong\u003e\n    After installing this cell, run one complete discharge-charge cycle with fast charging disabled. The 792's fuel gauge IC was calibrated to the old cell's discharge curve — giving it one full uninterrupted cycle lets it remap against the new cell before fast-charge current is applied.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Avvio 792 reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe 792 uses a coulomb-counter fuel gauge IC that tracks charge state against a stored discharge curve learned from the original cell. When you install a new cell, that stored curve no longer matches the new cell's actual voltage-versus-capacity profile. The gauge reads voltage and maps it to the wrong percentage — so 60% displayed may be 40% actual. One full discharge down to automatic shutdown, followed by a full charge to 100%, forces the IC to rewrite the reference curve against the new cell.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the cell voltage drops sharply under load — typically when the modem fires during a call or the screen hits full brightness — faster than the fuel gauge predicted. The phone's low-voltage protection cuts power before the displayed percentage reaches zero. It is not a faulty cell; it is the gauge IC still using the old cell's curve. After one full calibration cycle, the shutdown threshold should track accurately. If it persists past two full cycles, check that the cutoff voltage on the protection circuit is sitting at or above 3.0V per cell.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43404136251482,"sku":"BWCS-KNW991SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43404136284250,"sku":"BWCS-KNW991SL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43404136317018,"sku":"BWCS-KNW991SL-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-KNW991SL-1.webp?v=1779369060","url":"https:\/\/batteryweb.com\/products\/avvio-792-replacement-battery-37v-2000mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}