{"product_id":"bard-medsystems-site-rite-5-replacement-battery-108v-5200mah-li-ion","title":"Bard Medsystems Site Rite 5 10.8V Replacement Battery 5200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBard Medsystems Site Rite 5 \/ Site Rite 6 — 10.8V Li-ion Replacement Battery (9770066)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 10.8V, 5200mAh (56.16Wh) lithium-ion battery for the Bard Medsystems Site Rite 5 and Site Rite 6 ultrasound systems. Both units are handheld vascular access devices that use real-time ultrasound imaging to locate veins during clinical procedures. OEM part numbers 9770066 and NF2040HD24 both apply to the internal battery position on these two platforms.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSite Rite 5 and 6 shared battery platform:\u003c\/strong\u003e\n    Both systems run the same 10.8V internal battery rail with an identical connector and BMS handshake protocol. The shared form factor — 213 × 52.2 × 19mm — fits either device without modification to the battery bay.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the Site Rite 5 power-on sequence and confirmed the BMS completed its initialisation handshake without fault codes. The pack held voltage above 9.9V under simulated probe-active load across multiple imaging cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-installation calibration on the Site Rite 5 and 6:\u003c\/strong\u003e\n    After fitting a new battery, run a full calibration cycle through the instrument menu before clinical deployment. The Site Rite maps cell state during that sequence, and skipping it causes the low-battery indicator to fire early — sometimes within the first imaging session.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS lockout on the Site Rite 5 after the unit sat unused in a carry case for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge over storage. If the Site Rite 5 sat unused for several months, the internal pack can drop below the BMS recovery threshold — typically around 2.5V per cell, or roughly 7.5V pack voltage. Below that point, the BMS locks out charge input as a safety measure and the device will not respond to the charger. To recover the pack, connect it to the charger and leave it for at least 30 minutes without interruption — some BMS controllers require a trickle-charge window before they re-enable the main charge path.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSite Rite 5 shuts down at the moment the probe module initialises\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the Site Rite 5 powers up the probe, the transducer draw spikes sharply for a fraction of a second. On an aged or partially discharged battery, that current spike pulls cell voltage below the BMS undervoltage cutoff, and the system shuts down immediately — often before the imaging screen appears. The fault looks like a power button failure but it is a voltage event. Charge the battery fully to at least 12.4V before the next startup, then power on the device before activating the probe from the menu rather than cold-starting with the probe already connected.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360776355930,"sku":"BWCS-ALE600SL-1","price":173.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360776388698,"sku":"BWCS-ALE600SL-2","price":205.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360776421466,"sku":"BWCS-ALE600SL-3","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ALE600SL-1.webp?v=1778616258","url":"https:\/\/batteryweb.com\/products\/bard-medsystems-site-rite-5-replacement-battery-108v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}