{"product_id":"bci-spectro2-pulse-oximeters-replacement-battery-74v-2600mah-li-ion","title":"BCI SpectrO2 Replacement Battery 7.4V 2600mAh DI5070","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBCI SpectrO2 Series — 7.4V Li-ion Replacement Battery (DI5070)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 2600mAh Li-ion battery is a direct replacement for the BCI SpectrO2 pulse oximeter range. It fits the SpectrO2 10, SpectrO2 20, and SpectrO2 30 models. These devices monitor oxygen saturation and heart rate in clinical and home patient care settings.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSpectrO2 10 \/ 20 \/ 30 compatibility:\u003c\/strong\u003e\n    All three models share the same 7.4V battery platform, connector pinout, and BMS handshake protocol. The DI5070 cell pack meets that shared voltage rail and communication spec across the series.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the SpectrO2 platform. The BMS completed its learn cycle without fault flags, and the charge IC accepted the cell without triggering a chemistry mismatch error.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap self-test protocol:\u003c\/strong\u003e\n    After installing this battery, allow the device to complete its full power-on self-test without interruption. The SpectrO2 runs a BMS verification sequence at startup — cutting power mid-sequence locks in a false battery fault that won't clear until the next complete reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the SpectrO2 alarms low battery immediately after a confirmed full charge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe SpectrO2 BMS stores OEM chemistry calibration data and compares incoming cell voltage against that baseline during startup. A new replacement cell hasn't completed a learn cycle, so its resting voltage profile can read outside the OEM threshold even when fully charged. The device interprets this as a fault and triggers the low battery alarm. One complete charge-discharge cycle lets the BMS re-map the cell and resolve the false alarm without any settings change.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSpectrO2 not completing boot sequence after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eIf the oximeter stalls mid-boot or loops on the startup screen after a swap, the BMS has likely not yet passed its initialisation handshake. This happens most often when the replacement cell has self-discharged in storage below the BMS recovery threshold — typically under 6.0V on a 7.4V Li-ion pack. Connect the device to the charger and allow a full uninterrupted charge to 8.4V before attempting to power on. Once the cell reaches full charge, the boot sequence completes normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381477179482,"sku":"BWCS-BCM210MD-1","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381477212250,"sku":"BWCS-BCM210MD-2","price":68.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381477245018,"sku":"BWCS-BCM210MD-3","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BCM210MD-1.webp?v=1778901051","url":"https:\/\/batteryweb.com\/products\/bci-spectro2-pulse-oximeters-replacement-battery-74v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}