{"product_id":"beko-vrr-60110-replacement-battery-108v-2600mah-li-ion","title":"Beko VRR 60110 Replacement Battery 10.8V 2600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBeko VRR 60110 \/ VRR 60110 VW — 10.8V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 10.8V, 2600mAh (28.08Wh) lithium-ion battery pack for the Beko VRR 60110 and VRR 60110 VW cordless stick vacuums. It slots into the same battery bay as the original and powers the vacuum's motor for floor and surface cleaning. Use this when the original cell no longer holds a useful charge.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVRR 60110 and VRR 60110 VW compatibility:\u003c\/strong\u003e\n    Both variants run the same 10.8V motor rail with the same battery bay connector and BMS communication protocol. One cell fits both without any modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through repeated charge and discharge cycles on the VRR 60110 motor. The BMS handled overcurrent trips correctly on simulated blockage loads and returned to normal draw once the restriction was cleared.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging practice for the VRR 60110:\u003c\/strong\u003e\n    Do not leave the vacuum sitting on the charging dock permanently. Continuous trickle charging through the dock accelerates capacity fade in Li-ion packs. Charge to full, then remove it from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low on the VRR 60110\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the motor draws more current than the BMS allows under load — not because the cell is empty. A partially blocked filter or tangled brush roll forces the motor to pull harder, causing voltage to sag below the BMS threshold. The BMS then reduces output to protect the cell, and suction drops noticeably. Clean the filter and clear the brush roll before assuming the battery is at fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. When suction airflow is restricted — blocked filter, full dust cup, or jammed brush — the motor sustains a current draw above the pack's rated limit. The BMS trips and cuts power to protect the cells. After a short cool-down, it resets and the motor runs again. Empty the dust cup, clean or replace the filter, and the trip threshold drops back to normal operating range.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427954458714,"sku":"BWCS-SRV150VX-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427954491482,"sku":"BWCS-SRV150VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427954524250,"sku":"BWCS-SRV150VX-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SRV150VX-1.webp?v=1779933440","url":"https:\/\/batteryweb.com\/products\/beko-vrr-60110-replacement-battery-108v-2600mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}