{"product_id":"bestway-flowclear-replacement-battery-74v-3350mah-li-ion","title":"Bestway BST-58482 Flowclear Replacement Battery 7.4V 3350mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBestway Flowclear \/ Aquatronix — 7.4V Li-ion Replacement Battery (BST-58482)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.4V 3350mAh (24.79Wh) Li-ion battery replaces the OEM BST-58482 cell in the Bestway Flowclear and Aquatronix cordless pool vacuum cleaners. It slots into the same battery housing and connects through the same BMS interface as the original. Swap it in when the original cell no longer holds enough charge to complete a cleaning cycle.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFlowclear and Aquatronix compatibility:\u003c\/strong\u003e\n    Both models run the same 7.4V two-cell Li-ion pack with an identical connector pinout and BMS handshake. One replacement cell covers both units — no wiring or adapter changes needed.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through full discharge and recharge sequences while monitoring BMS cutoff thresholds. The protection circuit tripped correctly at low-voltage limits and cleared on reconnection without requiring a manual reset.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for pool vacuums:\u003c\/strong\u003e\n    Do not leave the Flowclear sitting on the charging dock between pool cleans. Continuous dock contact on this battery chemistry causes capacity fade over weeks, not months. Charge it fully, then disconnect and store it off the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator shows low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the filter is partially blocked and forces the motor to draw more current than its rated load. The BMS reads the elevated draw as a cell stress event and reduces output voltage to protect the pack — suction falls even though charge level looks fine. The battery is not at fault here. Pull the filter, rinse it under running water, and let it dry fully before reinstalling. A clean filter brings motor draw back inside rated limits and restores full suction across the whole charge cycle.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cuts out mid-cycle then recovers after a few seconds\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. It triggers when the vacuum ingests debris that restricts the impeller and spikes current draw above the protection threshold. The BMS shuts the output, waits for current to drop, then resets — which is why the unit restarts on its own after a brief pause. Clear the debris path at the impeller intake and check the filter for blockage. If trips repeat on a clean machine, measure resting cell voltage — it should sit above 7.2V on a full charge.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43427960094810,"sku":"BWCS-BTF482VX-1","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43427960127578,"sku":"BWCS-BTF482VX-2","price":51.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43427960160346,"sku":"BWCS-BTF482VX-3","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BTF482VX-1.webp?v=1779933520","url":"https:\/\/batteryweb.com\/products\/bestway-flowclear-replacement-battery-74v-3350mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}