{"product_id":"betacom-bc400-replacement-battery-36v-700mah-ni-mh","title":"Betacom BC400 Cordless Phone Compatible Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBetacom BC400 \/ E900 Series — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V 700mAh Ni-MH replacement battery for Betacom cordless phones including the BC400, CHEETAH, E3250, and E900, plus eleven additional compatible handsets. It fits the handset battery bay directly and restores talk and standby function when the original cell has degraded. Voltage and capacity match the factory specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBC400 and E900 series compatibility:\u003c\/strong\u003e\n    These models share the same 3.6V single-cell Ni-MH architecture, connector pinout, and physical bay dimensions — 45.90 x 31.20 x 10.70mm — so one battery covers all of them without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a cordless phone test rig. The cell accepted charge normally from the base station dock, and voltage held steady across standby and active RF transmit loads.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge conditioning for Ni-MH handsets:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells ship partially discharged and need one slow, uninterrupted charge cycle to reach rated capacity — skipping this shortens usable talk time from the start.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than original battery after replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells do not deliver full rated capacity on the first cycle. A new 700mAh pack may perform closer to 500–550mAh for the first three to five charge-discharge cycles. This is not a fault — it is how Ni-MH chemistry conditions. Each full cycle builds plate capacity until the cell stabilises at its rated value. Run three complete charge-drain cycles through normal use and capacity will reach its rated 700mAh.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge light or error after installing new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eBetacom base stations check incoming voltage before committing charging current. A new Ni-MH pack that has been in storage can sit below 3.0V — low enough that the base station's charge controller rejects it as a fault condition. Remove the handset, wait 30 seconds, then re-seat it firmly so both charge contacts close fully. If the error persists, connect the handset to a USB Ni-MH trickle charger at 50–100mA for 15 minutes to raise the cell above 3.2V, then return it to the base.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340012322906,"sku":"BWCS-CPB8011-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340012355674,"sku":"BWCS-CPB8011-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340012388442,"sku":"BWCS-CPB8011-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CPB8011-1.webp?v=1778367024","url":"https:\/\/batteryweb.com\/products\/betacom-bc400-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}