{"product_id":"betacom-bc400-replacement-battery-36v-800mah-ni-mh","title":"Betacom BC400 Cordless Phone Replacement Battery 3.6V 800mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBetacom BC400 — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 800mAh Ni-MH rechargeable battery for the Betacom BC400 cordless phone handset. It slots into the handset and powers all wireless communication with the base station. Swap it in when the original pack no longer holds a charge through a normal day of use.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBC400 handset fit:\u003c\/strong\u003e\n    The BC400 runs a single-cell Ni-MH pack at 3.6V — the same voltage rail the handset logic board and RF transmitter draw from. Swapping to a pack with a different voltage or chemistry trips the low-voltage cutoff and causes erratic behaviour.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the bench, monitoring the BMS response at cutoff thresholds. Charge acceptance and voltage curve matched the original OEM spec across multiple cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for Ni-MH handsets:\u003c\/strong\u003e\n    Place the handset in the base for a full 16-hour charge before first use. Ni-MH cordless phone batteries need that slow initial charge to reach rated capacity — a short first charge leaves the cells only partially formed and you will see shorter talk time from day one.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than expected after fitting the new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells in cordless phones need three to five full charge and discharge cycles before they reach rated capacity. The first cycle typically delivers 60–70% of the pack's 800mAh rating. Each subsequent full cycle conditions the cells further. By cycle five, talk time stabilises at the rated level — do not judge the battery on cycle one.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows no charge or error light after fitting replacement battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA Ni-MH pack that has sat in storage can drop below the voltage floor the base station uses to detect a valid battery. The charger circuit sees a voltage it does not recognise as a healthy pack and refuses to begin charging. Remove the handset, leave it off the base for 30 seconds, then reseat it firmly — full contact on the charging pins is required. If the error persists, the pack may need a brief trickle charge to bring the resting voltage above the base acceptance threshold, typically around 3.0V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43340002525274,"sku":"BWCS-ALM170CL-1","price":20.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43340002558042,"sku":"BWCS-ALM170CL-2","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43340002590810,"sku":"BWCS-ALM170CL-3","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-ALM170CL-1.webp?v=1778367023","url":"https:\/\/batteryweb.com\/products\/betacom-bc400-replacement-battery-36v-800mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}