{"product_id":"binatone-bb500-replacement-battery-24v-600mah-ni-mh","title":"Binatone BT-34H Cordless Phone Compatible Battery 2.4V 600mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBinatone BB500 \/ E3800 Series — 2.4V Ni-MH Replacement Battery (BT-34H)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 2.4V, 600mAh Ni-MH rechargeable battery for Binatone cordless phone handsets. It fits the BB500, BB600, E800, and E3800 among others using the BT-34H pack. When the original battery no longer holds a charge, this restores full call and standby function to the handset without replacing the whole phone.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBB500 \/ BB600 \/ E800 \/ E3800 compatibility:\u003c\/strong\u003e\n    These handsets share the same 2.4V two-cell NiMH pack format, the same physical footprint (45 × 21 × 10mm), and the same base-station charging circuit. One battery spec covers all of them.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through the Binatone base station charging circuit. The base accepted charge immediately, current tapered correctly at full state, and the BMS showed no false cutoff during the first three conditioning cycles.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-charge protocol for NiMH cordless packs:\u003c\/strong\u003e\n    After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells in cordless phones need this slow initial charge to reach rated capacity — skipping it typically results in shortened talk time for the first several uses.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRange dropping after a battery swap on Binatone handsets\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eBinatone DECT handsets regulate transmit power based on available voltage from the battery pack. A new NiMH battery arriving from storage sits at a partial state of charge — often below 2.2V. Under RF load that voltage sags further, causing the handset's transmitter to throttle down. The result is reduced range that looks like a faulty battery but is actually a conditioning issue. Two to three full charge cycles through the base station bring the cells to rated voltage and restore normal transmit power.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station charge light not coming on with new pack installed\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eBinatone base stations use a delta-V detection circuit to confirm a NiMH pack is present and accepting charge. If the pack voltage is too low from storage, the base may not trigger the charge cycle at all — the indicator stays dark or shows an error. Remove the handset, wait 10 seconds, and reseat it firmly so the contacts align. If the light still does not activate, check the pack voltage with a multimeter — a reading below 1.8V means the cells have deep-discharged and need a slow trickle at around 60mA to recover before the base circuit will take over.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339990073434,"sku":"BWCS-BTB500CL-1","price":21.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339990106202,"sku":"BWCS-BTB500CL-2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339990138970,"sku":"BWCS-BTB500CL-3","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BTB500CL-1.webp?v=1778366983","url":"https:\/\/batteryweb.com\/products\/binatone-bb500-replacement-battery-24v-600mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}