{"product_id":"biolight-m69-replacement-battery-12v-2300mah-sealed-lead-acid","title":"Biolight M69 Patient Monitor Replacement Battery 12V 2300mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBiolight M69 — 12V Sealed Lead Acid Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 12V 2300mAh (27.6Wh) sealed lead-acid replacement battery for the Biolight M69 patient monitor. The M69 is a portable vital signs monitor used in hospital wards and clinical settings to track heart rate, blood pressure, and SpO2. This battery restores portable and backup power operation to the unit.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eM69 monitor compatibility:\u003c\/strong\u003e\n    The M69 runs a 12V internal bus that powers the display, sensors, and alarm circuits simultaneously. Sealed lead-acid chemistry matches the charge profile the M69's onboard charge IC expects — substituting a different chemistry without reconfiguring the charger will damage the cell and trigger continuous fault states.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran the battery through a full charge-discharge cycle and verified the BMS accepted the cell without throwing a fault code. The charge IC reached float stage cleanly, and load testing confirmed stable voltage delivery across the M69's full sensor stack.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap power-on sequence:\u003c\/strong\u003e\n    After installing this battery, allow the M69 to complete its full power-on self-test without interruption. The device runs a BMS verification step at startup — cutting power during this sequence causes a false battery fault that persists until the next clean reboot cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the M69 alarms low battery immediately after a confirmed full charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe M69's BMS stores a learned capacity profile from the previous cell. When a new battery is installed, the BMS compares the new cell's initial voltage response against that stored baseline. A fresh sealed lead-acid cell has slightly different internal resistance characteristics before its first full cycle, which the BMS reads as degraded capacity. One complete charge-discharge cycle allows the BMS to rewrite its threshold and clear the alarm. Do not enter the battery into clinical rotation until this cycle is complete.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eM69 fails to complete boot sequence after battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSealed lead-acid cells self-discharge at roughly 3–5% per month. A battery stored for six months or more can drop below 10.5V — the threshold at which the M69's BMS refuses to initialise the boot sequence. The device will appear dead or loop on the splash screen. Connect the unit to mains power first and allow a minimum two-hour charge before attempting to boot on battery alone. Once the cell recovers above 11V, the BMS will re-engage and the boot sequence will complete normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381388148826,"sku":"BWCS-SHT160MD-1","price":310.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381388181594,"sku":"BWCS-SHT160MD-2","price":370.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381388214362,"sku":"BWCS-SHT160MD-3","price":415.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SHT160MD-1.webp?v=1778900511","url":"https:\/\/batteryweb.com\/products\/biolight-m69-replacement-battery-12v-2300mah-sealed-lead-acid","provider":"BatteryWeb","version":"1.0","type":"link"}