{"product_id":"bionet-bm7-vet-elite-replacement-battery-108v-6700mah-li-ion","title":"Bionet BM7 Vet Elite 10.8V Replacement Battery 68L335-BIO-S","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBionet BM7 Vet Elite — 10.8V Li-ion Replacement Battery (68L335-BIO-S)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 10.8V 6700mAh Li-ion battery is a direct replacement for the Bionet BM7 Vet Elite veterinary patient monitor. It fits clinics and field settings where uninterrupted ECG, SpO2, and temperature monitoring is critical. Voltage and capacity match the OEM specification — 10.8V, 6700mAh (72.36Wh).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBM7 Vet Elite platform fit:\u003c\/strong\u003e\n    The BM7 Vet Elite uses a dedicated battery bay with a multi-pin connector that carries both power and BMS communication. This replacement uses the same pin configuration and cell voltage profile, so the monitor's charge IC and fuel gauge read the battery correctly without throwing a fault code.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this battery through charge and load on the BM7 Vet Elite platform. The BMS handshake completed cleanly, the charge IC accepted the cell, and the monitor's battery indicator tracked accurately across the full discharge curve.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap self-test protocol:\u003c\/strong\u003e\n    After installing this battery, let the BM7 Vet Elite complete its full power-on self-test without interrupting it. The device runs BMS verification at startup — cutting power during this sequence can trigger a false battery fault that persists until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBM7 Vet Elite not completing boot sequence on new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe BM7 Vet Elite runs a BMS learn cycle at first power-on. A new cell that hasn't completed one full charge-discharge cycle may not satisfy the monitor's internal capacity threshold during this sequence, causing the boot to stall or loop. This isn't a fault with the battery — it's the device applying an OEM chemistry verification check. Run one complete charge to full, then discharge under normal monitoring load, and the boot sequence will complete normally on subsequent power-ons.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharge indicator stuck below 100% on first charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the first charge cycle, the BM7 Vet Elite's charge IC applies a conservative current limit to an unrecognised cell. This causes the charge indicator to plateau — often between 85% and 95% — before the cycle technically completes. The cell is not defective; the fuel gauge calibration simply hasn't anchored to the new cell's actual capacity yet. Complete one full charge-discharge cycle and the indicator will read accurately from the second charge onward. If it still plateaus after two full cycles, verify the charger output voltage is stable at 12.6V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381366620250,"sku":"BWCS-BEM7000MX-1","price":80.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381366653018,"sku":"BWCS-BEM7000MX-2","price":95.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381366685786,"sku":"BWCS-BEM7000MX-3","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BEM7000MX-1.webp?v=1778900266","url":"https:\/\/batteryweb.com\/products\/bionet-bm7-vet-elite-replacement-battery-108v-6700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}