{"product_id":"bissell-multireach-1317-replacement-battery-252v-3500mah-li-ion","title":"Bissell Multireach 1317 Replacement Battery 25.2V 3500mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBissell Multireach 1317 \/ 1311 Series — 25.2V Li-ion Replacement Battery (61-0075-502)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 25.2V 3500mAh Li-ion battery replaces the original pack in the Bissell Multireach 1317, 1311, and P481-25 cordless stick vacuums. It powers the motorized brush roll and suction motor through full cleaning cycles. Capacity is sourced from product data at 3500mAh \/ 88.2Wh — matching the original specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMultireach 1317, 1311, and P481-25 platform fit:\u003c\/strong\u003e\n    These models share the same 25.2V cell configuration, battery bay dimensions, and connector layout. The BMS handshake protocol is identical across the range, so the replacement pack communicates with the motor controller without modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through the Multireach motor start sequence and sustained suction load. The BMS held voltage above the low-cutoff threshold under continuous carpet load, and the protection circuit responded correctly to simulated blockage overcurrent without tripping the pack into fault lock.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit on cordless stick vacuums:\u003c\/strong\u003e\n    Do not leave the Multireach sitting on the charging dock permanently. Continuous trickle charge accelerates capacity fade in Li-ion packs faster than regular charge-and-discharge cycles. Charge fully, then remove the vacuum from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA partially blocked filter forces the Multireach motor to draw more current than rated to maintain airflow. That elevated draw causes the pack voltage to sag early — the indicator reads mid-charge, but the motor is already running lean. The BMS reads this as approaching the low-voltage cutoff and throttles output before the LED signals low. Clean or replace the filter first; if suction recovers, the battery is not the fault.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eMotor cutting out mid-clean and then recovering after a pause\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. Sustained restricted suction — from a full dustbin, blocked brush roll, or clogged post-motor filter — spikes current draw above the pack's protection threshold. The BMS disconnects output to protect the cells, then resets after the pack cools slightly. Clear the blockage, let the vacuum sit for 90 seconds, then restart. If the cutout repeats on an unblocked machine, check pack voltage at the terminals — a healthy pack should read at or above 22V under no-load.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426481340506,"sku":"BWCS-BSM318VX-1","price":60.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426481373274,"sku":"BWCS-BSM318VX-2","price":70.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426481406042,"sku":"BWCS-BSM318VX-3","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BSM318VX-1.webp?v=1779933372","url":"https:\/\/batteryweb.com\/products\/bissell-multireach-1317-replacement-battery-252v-3500mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}