{"product_id":"bluebird-pidion-bip-6000-replacement-battery-37v-6400mah-li-ion","title":"BlueBird Pidion BIP-6000 Compatible Battery 3.7V 6400mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBlueBird Pidion BIP-6000 — 3.7V Li-ion Replacement Battery (NX5-2004)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V 6400mAh Li-ion battery fits the BlueBird Pidion BIP-6000 handheld mobile computer — a rugged barcode scanner used in retail, logistics, and warehouse pick-and-pack operations. It matches the original cell format, connector, and BMS communication protocol. Capacity is rated at 23.68Wh using product-verified data.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBIP-6000 platform fit:\u003c\/strong\u003e\n    The BIP-6000 uses a single-cell 3.7V pack with a multi-pin connector that carries BMS data to the device's power management IC. This replacement carries the same pin-out and BMS handshake, so the scanner's battery indicator reads correctly without calibration errors.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through simulated scan bursts combined with Wi-Fi polling loads. The BMS held charge thresholds stable across both the laser trigger inrush and continuous wireless draw without tripping low-voltage cutoff prematurely.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-shift preparation for the BIP-6000:\u003c\/strong\u003e\n    Place the scanner in its cradle for a full charge cycle before using it on the floor. The scan trigger inrush current is highest when the cell is near minimum voltage, and starting the first shift on a fully charged pack prevents false BMS trips during high-frequency scanning in the first hour.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCradle charging error on the BIP-6000 after fitting a new pack\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe BIP-6000 cradle communicates with the battery over the multi-pin dock contacts. If those contacts have oxidation or residue from the old pack, the dock reads an open circuit and flags a charging fault — even though the new cell is fine. The cradle's charge controller expects a handshake voltage above a set threshold on the data pin before it begins the charge cycle. A failed handshake at the dock level does not mean the battery is faulty.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eScanner losing wireless connection during rapid scan bursts\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eDuring fast barcode scanning, the radio and the scan trigger fire simultaneously, creating a combined inrush load on the cell. If the cell voltage sags below approximately 3.2V under this combined draw, the radio module drops its connection before the BMS trips. This is not a wireless fault — it is a voltage-sag event caused by a degraded or deeply discharged cell. Charge the pack to 4.1–4.2V before the shift and the sag headroom is sufficient to sustain both loads together.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43324818161754,"sku":"BWCS-NTX500BX-1","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43324818194522,"sku":"BWCS-NTX500BX-2","price":52.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43324818227290,"sku":"BWCS-NTX500BX-3","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NTX500BX-1.webp?v=1778123185","url":"https:\/\/batteryweb.com\/products\/bluebird-pidion-bip-6000-replacement-battery-37v-6400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}