{"product_id":"bluemedia-ms-1006-replacement-battery-144v-4400mah-li-ion","title":"BlueMedia MS-1006 Replacement Battery 14.4V 4400mAh Li-ion","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBlueMedia MS-1006 \/ MS-1012 — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 4400mAh (63.36Wh) Li-ion battery for the BlueMedia MS-1006 and MS-1012 notebooks. It matches the original voltage rail and connector, so no adapter or modification is needed. Fit both models share the same battery bay geometry and BMS communication protocol.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMS-1006 and MS-1012 platform fit:\u003c\/strong\u003e\n    Both models use the same 14.4V four-cell configuration and identical connector pinout. The BMS handshake uses the same SMBus address across the two models, so the battery communicates correctly with either machine without firmware conflict.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and load cycles on the MS-1006 platform. The BMS reported capacity accurately to the OS after two calibration cycles, and charge termination triggered cleanly at 16.8V with no thermal event.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-install discharge cycle — MS-1006 and MS-1012 specific:\u003c\/strong\u003e\n    After fitting, run one full discharge to hibernate-cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that typically appears after a cell swap on this platform.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBIOS reporting poor battery health after fitting this cell\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe MS-1006 BIOS reads health data from EEPROM registers on the battery's protection board. A new cell carries fresh EEPROM values that don't match the usage history the BIOS cached from the old pack. This mismatch triggers a \"poor health\" or \"replace battery\" flag immediately after install, even though the cell is new. One complete discharge-to-hibernate followed by a full uninterrupted charge clears the cached data and lets the BIOS re-learn the cell's actual capacity baseline.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eLaptop cuts out at 20–30% charge shown on screen\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the fuel gauge IC hasn't completed a calibration cycle against the new cell. The percentage shown on screen is calculated against the old cell's discharge curve, so the OS calls a low-battery shutdown while actual charge remains. The cell itself is not at fault — the gauge IC needs two or three full discharge-to-charge cycles to map the new cell's voltage curve accurately. After those cycles, the cutoff point should track correctly down to the 5–8% range where the BIOS-set low-voltage floor sits.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43409816223834,"sku":"BWCS-MSX320NB-1","price":101.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43409816256602,"sku":"BWCS-MSX320NB-2","price":116.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43409816289370,"sku":"BWCS-MSX320NB-3","price":127.99,"currency_code":"USD","in_stock":true}],"url":"https:\/\/batteryweb.com\/products\/bluemedia-ms-1006-replacement-battery-144v-4400mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}