{"product_id":"bosc-ba-610-replacement-battery-6v-4200mah-ni-mh","title":"BOSC BA-610 6V Ni-MH Replacement Battery 4200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBOSC BA-610 \/ BA-611 \/ C-51 \/ C-61 Series — 6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 6V 4200mAh Ni-MH replacement battery for BOSC digital cameras including the BA-610, BA-611, C-51, and C-61, plus 14 additional compatible models. It slots into the same battery compartment as the original cell and connects through the same BMS interface. Voltage and physical dimensions match OEM spec exactly: 88.95 × 47.55 × 36.50mm.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBA-610 \/ BA-611 \/ C-series compatibility:\u003c\/strong\u003e\n    These models share the same 6V power rail, battery bay dimensions, and BMS handshake protocol, which is why one cell covers all of them. Swapping voltage or terminal layout across this family would trigger a protection fault — this cell avoids that.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on camera-class load equipment. The BMS held stable across the full discharge curve with no mid-cycle cutoff. Cell temperature stayed within safe operating range throughout.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle camera BMS initialisation:\u003c\/strong\u003e\n    Run one complete charge cycle through the OEM charger or the camera body itself before heavy shooting. Some BOSC BMS systems need an internal charge cycle to calibrate battery-remaining display and accept the new cell without flagging a mismatch warning.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eFlash recycling slowing down before the battery indicator shows low\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe flash capacitor draws a sharp recharge current after every shot. As a Ni-MH cell discharges, internal resistance rises — not enough to trip the BMS, but enough to slow capacitor recharge noticeably. You'll feel it as longer gaps between shots before the flash is ready, even while the battery indicator still shows partial charge. This happens earlier in the discharge cycle with Ni-MH than with lithium chemistries because Ni-MH voltage sag starts well before the cutoff point. If recycling time extends beyond your normal rhythm, plan to recharge — the usable capacity for flash-heavy shooting ends before the cell is fully depleted.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBattery percentage jumping between readings during a shoot\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells have a flatter discharge curve than the lithium profile most camera BMS firmware is calibrated against. The camera maps voltage thresholds to percentage estimates, and a new Ni-MH cell's voltage can sit in an ambiguous zone between those thresholds, causing the display to jump — say, from 60% to 35% — without a corresponding drop in actual capacity. This is a firmware mapping artefact, not a fault with the cell. After two or three full charge-discharge cycles, the BMS builds a better voltage-to-capacity history and the readout stabilises. Run the cell to near-flat and charge fully in the camera body to accelerate that calibration.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43333904597082,"sku":"BWCS-NP66-1","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43333904629850,"sku":"BWCS-NP66-2","price":58.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43333904662618,"sku":"BWCS-NP66-3","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NP66_1.webp?v=1778213590","url":"https:\/\/batteryweb.com\/products\/bosc-ba-610-replacement-battery-6v-4200mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}