{"product_id":"bosch-atus-dect-6000-replacement-battery-36v-700mah-ni-mh","title":"Bosch Atus DECT 6000 Replacement Battery 3.6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBosch Atus DECT 6000 \/ Atus DE1-BX — 3.6V Ni-MH Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 3.6V, 700mAh Ni-MH rechargeable battery for the Bosch Atus DECT 6000 and Atus DE1-BX cordless phone handsets. It replaces the original cell when the handset stops holding charge or drops out of use faster than it used to. Dimensions are 45.00 x 31.10 x 10.50mm — same footprint as the factory pack.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAtus DECT 6000 and DE1-BX platform fit:\u003c\/strong\u003e\n    Both handset models run the same 3.6V single-cell NiMH configuration with the same connector orientation and contact spacing. One battery SKU covers both without any modification.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran charge and discharge cycles through a base station cradle to confirm the BMS accepted the pack without throwing a charge error. Cell voltage at full charge sat at 1.42V per cell, within spec for NiMH.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge after install:\u003c\/strong\u003e\n    Place the handset in the base cradle immediately after fitting and leave it for a full 16 hours before first use. NiMH cells shipped in storage state need a slow initial charge to reach rated capacity — skipping this step will leave the battery underperforming for weeks.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTalk time shorter than expected after the first few charges\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNiMH cells often underdeliver capacity in the first three to five full cycles. This is not a fault — the cell chemistry needs full charge-discharge cycles to reach rated 700mAh capacity. During early cycles, the cells may only deliver 60–75% of rated capacity. Run three complete charge-and-use cycles with the handset, letting the battery deplete through normal calls before returning it to the base each time.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station showing a charge error light after battery swap\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new NiMH pack that has sat in storage can arrive at a resting voltage below the threshold the Atus base station uses to confirm a valid battery is seated. The base interprets this low voltage as a fault and refuses to charge. Remove the handset, leave it out of the cradle for 30 seconds, then reseat it firmly. If the error persists, use a USB NiMH trickle charger to bring the cell up to roughly 3.6V before returning it to the base.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43339929747546,"sku":"BWCS-NTL743CL-1","price":22.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43339929780314,"sku":"BWCS-NTL743CL-2","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43339929813082,"sku":"BWCS-NTL743CL-3","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-NTL743CL_1.webp?v=1778367002","url":"https:\/\/batteryweb.com\/products\/bosch-atus-dect-6000-replacement-battery-36v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}