{"product_id":"bosch-vpe-2-replacement-battery-144v-1500mah-ni-mh","title":"Bosch VPE-2 14.4V Replacement Battery 1500mAh Ni-MH","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBosch VPE-2 — 14.4V Ni-MH Replacement Battery (2 607 335 210)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 1500mAh Ni-MH replacement battery for the Bosch VPE-2 cordless power tool. It replaces OEM part numbers including 2 607 335 210, BAT013, BAT015, and 2 610 995 883. The battery slots into the same bay as the original and connects through the same multi-pin terminal block.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVPE-2 and BAT013\/BAT015 platform:\u003c\/strong\u003e\n    These models share a 14.4V battery rail with an identical connector footprint and the same BMS communication protocol. One pack covers the full compatibility group without any adapter.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack under simulated drill loads and confirmed the BMS handles inrush current correctly at trigger pull without tripping overcurrent protection. Cell voltage held steady across full discharge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eMotor-load conditioning on first use:\u003c\/strong\u003e\n    On first use, run the VPE-2 at half load for two cycles before applying maximum torque. This lets the BMS log the motor's inrush profile and calibrate its overcurrent threshold before you put the tool under full stress.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff on VPE-2 motor-start inrush surge\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen you pull the trigger on the VPE-2, the motor draws a spike of current well above its running draw — often three to five times higher in the first millisecond. A Ni-MH pack that has been in storage has elevated internal resistance, which amplifies the voltage dip at the cell terminals. If the BMS reads that dip as an overcurrent event, it cuts the output rail before the motor even spins. Running two gentle break-in cycles first lowers internal resistance and lets the BMS set a more accurate trip threshold.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharger blinks red and won't accept the new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eBosch 14.4V chargers run a pre-charge handshake — if the pack voltage sits below roughly 10V after storage, the charger rejects it rather than entering bulk charge mode. This is a self-protection circuit, not a sign the battery is faulty. Leave the pack connected to the charger for 10–15 minutes; some chargers trickle a small current during this window to bring cells up to the acceptance threshold. Once the pack reads above 10.5V across the terminals, the charger steps into normal charge mode and the indicator shifts to amber or green.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43416082514010,"sku":"BWCS-BSR144PW-1","price":85.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43416082546778,"sku":"BWCS-BSR144PW-2","price":100.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43416082579546,"sku":"BWCS-BSR144PW-3","price":111.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-BSR144PW-1.webp?v=1779760222","url":"https:\/\/batteryweb.com\/products\/bosch-vpe-2-replacement-battery-144v-1500mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}