{"product_id":"bruker-3002-ih-replacement-battery-144v-3000mah-ni-mh","title":"Bruker 3002 IH 14.4V Ni-MH Replacement Battery 3000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eBruker 3002 IH — 14.4V Ni-MH 3000mAh Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V Ni-MH replacement battery rated at 3000mAh (43.2Wh) for the Bruker 3002 IH portable analytical instrument. It fits the handheld unit directly and restores field operation when the original cell has degraded. Voltage and capacity match the 3002 IH power rail specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBruker 3002 IH compatibility:\u003c\/strong\u003e\n    The 3002 IH uses a 14.4V Ni-MH chemistry with a BMS that performs a handshake at startup to verify cell voltage and temperature response. A cell that does not match this voltage profile will fail the handshake and trigger a low-battery fault before the device finishes booting.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through the 3002 IH boot sequence and confirmed the BMS handshake completed without a fault flag. The charge IC accepted a full charge cycle and the self-test completed on the first attempt after one conditioning cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use self-test protocol:\u003c\/strong\u003e\n    After installing this battery, allow the 3002 IH to complete its full power-on self-test without interruption. The BMS runs a verification sequence at startup — cutting power mid-cycle writes a false fault to the battery register that persists until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the 3002 IH alarms low battery on a freshly charged replacement\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells leave storage with an uneven charge distribution across the cell stack. The 3002 IH BMS reads cell voltage at startup and compares it against a minimum threshold calibrated for a conditioned OEM cell. A new cell that has not completed one full charge-discharge cycle often sits just below this threshold even after a full charge, which triggers the low-battery alarm before any actual depletion has occurred. Run one complete charge-discharge cycle before clinical use and the BMS will recalibrate against the new cell's actual resting voltage.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003e3002 IH will not power on after battery sat in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge at roughly 1–3% per day at room temperature. A battery stored for several months can drop below the BMS recovery threshold — typically around 10V for a 14.4V Ni-MH pack — at which point the device's protection circuit blocks turn-on to prevent cell reversal. Place the battery on charge for a full cycle before attempting to power on the unit. If the charge indicator does not activate within the first few minutes, check that the charger is supplying the correct voltage; the charge IC will not begin a recovery charge if input voltage is outside the accepted range.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381480915034,"sku":"BWCS-DEF300MD-1","price":101.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381480947802,"sku":"BWCS-DEF300MD-2","price":119.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381480980570,"sku":"BWCS-DEF300MD-3","price":133.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-DEF300MD-1.webp?v=1778901304","url":"https:\/\/batteryweb.com\/products\/bruker-3002-ih-replacement-battery-144v-3000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}