{"product_id":"cardo-scala-rider-packtalk-replacement-battery-37v-850mah-li-polymer","title":"Cardo Scala Rider Packtalk BAT00007 Replacement Battery 3.7V 850mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCardo Scala Rider Packtalk — 3.7V Li-Polymer Replacement Battery (BAT00007)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.7V, 850mAh Li-Polymer battery replaces the OEM pack in the Cardo Scala Rider Packtalk, Packtalk Duo, SRPT0102, and Scalarider Smartpack. It uses the same footprint and connector as the original cell — 56.14 x 26.00 x 5.80mm — so it seats correctly in the housing without modification. When the original cell no longer holds a charge through a ride, this is the direct swap.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePacktalk and Smartpack compatibility:\u003c\/strong\u003e\n    These models share the same battery bay dimensions, BMS connector pinout, and 3.7V cell voltage. The BAT00007 fits all four listed variants because the charging circuit and BMS handshake logic are identical across the Packtalk line.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through the Packtalk charging circuit and confirmed the BMS completed its handshake correctly. The protection circuit tripped at the expected low-voltage cutoff with no false shutdowns under combined Bluetooth and audio draw.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst charge after installation:\u003c\/strong\u003e\n    Place the headset in the charging cradle and run a full charge cycle before pairing or using it on the road. The Packtalk's talk-time estimate in the app won't be accurate until the base station has logged the new cell's charge curve through at least one complete cycle.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Packtalk cuts out mid-ride on a new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe Packtalk runs Bluetooth radio, audio output, and mesh intercom simultaneously — that combined draw can spike sharply during intercom handshakes. If the replacement cell hasn't been through at least one full charge cycle, its internal resistance sits higher than rated. The BMS reads that resistance as a low-voltage event and cuts the output to protect the cell. After two or three full charge-discharge cycles, internal resistance drops and the cutouts stop.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBase station shows a charging error after fitting the new pack\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the cell arrives at storage voltage — typically around 3.6V — and the base station's BMS doesn't recognise a valid charge state to begin its handshake. Connect the headset to the base and leave it undisturbed for 20 to 30 minutes. The charger needs that window to trickle-charge the cell up past the BMS acceptance threshold, usually 3.7V, before it switches to normal CC\/CV charging and clears the error.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43428121968730,"sku":"BWCS-SRD102SL-1","price":23.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43428122001498,"sku":"BWCS-SRD102SL-2","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43428122034266,"sku":"BWCS-SRD102SL-3","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-SRD102SL-1.webp?v=1779934191","url":"https:\/\/batteryweb.com\/products\/cardo-scala-rider-packtalk-replacement-battery-37v-850mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}