{"product_id":"care-vision-om-100-replacement-battery-72v-2000mah-ni-mh","title":"Care Vision OM-100 Medical Replacement Battery 7.2V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCare Vision OM-100 — 7.2V Ni-MH Replacement Battery (6HP-E200AA-3P)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.2V, 2000mAh Ni-MH battery replaces the OEM pack in the Care Vision OM-100 portable diagnostic device. It matches the original voltage, capacity, and connector spec for direct installation. Intended for clinical environments where continuous device availability matters.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOM-100 platform fit:\u003c\/strong\u003e\n    The OM-100 runs a single-voltage 7.2V Ni-MH rail with a BMS handshake that validates cell chemistry at power-on. This replacement uses matched Ni-MH cells at the same nominal voltage, so the BMS recognises the pack and clears the charge verification routine without flagging a chemistry mismatch.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on a medical-device test rig, monitoring BMS handshake signals and cutoff behaviour. The protection circuit held stable across the full discharge curve, and the pack passed the OEM-equivalent self-test threshold after one full conditioning cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap startup protocol:\u003c\/strong\u003e\n    After fitting this battery, let the OM-100 complete its full power-on self-test without interruption. The device runs a BMS verification sequence at startup — cutting power mid-sequence flags a false battery fault that persists until the next clean reboot from a fully charged state.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDevice not completing boot sequence on new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe OM-100 runs a startup self-test that includes a BMS learn cycle. A new cell that has not yet completed one full charge-discharge pass may sit below the BMS confidence threshold during this check, causing the boot sequence to stall or abort. This is not a fault with the battery — it is the device applying a conservative pass criterion to an unconditioned pack. Run one full charge cycle, then power the device on and allow the self-test to complete without interruption before clinical use.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eOM-100 will not power on after the battery has been in storage\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells self-discharge during storage at roughly 1–3% per day. A pack that has sat for several weeks can drop below the OM-100's BMS recovery threshold — typically around 5.5V for a 7.2V Ni-MH pack — which causes the device to appear completely dead rather than simply flat. Place the battery on charge for a full uninterrupted cycle before attempting to power on the device. If the charger does not initiate, try a different charger capable of applying a low-current trickle recovery below 0.1C to bring the pack back above the BMS wake threshold of approximately 6.0V.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381443788890,"sku":"BWCS-CVM100MD-1","price":40.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381443821658,"sku":"BWCS-CVM100MD-2","price":46.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381443854426,"sku":"BWCS-CVM100MD-3","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CVM100MD-1.webp?v=1778900837","url":"https:\/\/batteryweb.com\/products\/care-vision-om-100-replacement-battery-72v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}