{"product_id":"carestream-dblx-8-replacement-battery-144v-5200mah-li-ion","title":"CareStream DBLX-8 14.4V Replacement Battery 1083 5200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCareStream DBLX-8 — 14.4V Li-ion Replacement Battery (1083)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V, 5200mAh Li-ion replacement battery for the CareStream DBLX-8 digital radiography system. It restores cordless operation to the DBLX-8 when the original cell has degraded or failed. Voltage and capacity match OEM part number 1083.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDBLX-8 platform fit:\u003c\/strong\u003e\n    The DBLX-8 runs a 14.4V nominal rail with a multi-pin connector that carries both power and BMS data. This cell matches that connector pinout and communicates charge state back to the device's onboard charge controller — no fault codes from a voltage mismatch.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through charge and discharge on a DBLX-8 platform and confirmed the BMS handshake completed cleanly. The charge controller accepted the cell without triggering a battery authentication fault, and charge state reporting tracked accurately through the full cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePost-swap power-on sequence:\u003c\/strong\u003e\n    After installing this battery, let the DBLX-8 complete its full power-on self-test without interruption. The device runs a BMS verification check at startup — cutting power during this sequence logs a false battery fault that persists until the next clean reboot.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDBLX-8 not completing boot sequence on a new battery\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe DBLX-8 runs a BMS learn cycle during its first few charge-discharge passes on a new cell. Until that cycle completes, the charge controller applies conservative thresholds and may halt the boot sequence if it reads an unrecognised charge profile. This is not a fault with the battery — it is the device protecting itself from an unknown cell. Run one full charge-discharge cycle before using the unit clinically, and the boot sequence will complete normally on subsequent startups.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eCharge indicator not reaching 100% on the first charge\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eOn the first charge, the DBLX-8 charge IC applies a reduced current ceiling to a new cell while it maps the battery's internal resistance. This causes the indicator to stall below 100% or report a lower state of charge than the battery actually holds. It is not a defective cell. Allow the battery to complete a full charge cycle uninterrupted — the charge IC recalibrates its end-of-charge cutoff voltage (typically at 16.8V for a 14.4V 4S Li-ion pack) after the first cycle, and the indicator will read accurately from the second charge onwards.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43381459517530,"sku":"BWCS-CRX800MD-1","price":128.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43381459550298,"sku":"BWCS-CRX800MD-2","price":148.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43381459583066,"sku":"BWCS-CRX800MD-3","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CRX800MD-1.webp?v=1778900983","url":"https:\/\/batteryweb.com\/products\/carestream-dblx-8-replacement-battery-144v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}