{"product_id":"carlson-explorer-replacement-battery-72v-2000mah-ni-mh","title":"Carlson Explorer 6100.43 Replacement Battery 7.2V 2000mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCarlson Explorer — 7.2V Ni-MH Replacement Battery (6100.43)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 7.2V, 2000mAh Ni-MH battery replaces the original pack in the Carlson Explorer handheld surveying instrument. The Explorer is a field-grade device used for distance measurement, area calculation, and data logging on construction and survey sites. Voltage and capacity match the OEM specification exactly — 7.2V, 2000mAh (14.4Wh).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCarlson Explorer compatibility:\u003c\/strong\u003e\n    The Explorer uses a dedicated battery bay with a connector keyed to the 6100.43 form factor. The BMS handshake requires a pack that holds stable voltage across the full discharge curve — Ni-MH chemistry suits this because its relatively flat mid-discharge profile keeps the instrument's power rail steady during sensor reads and data writes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through charge and discharge cycles on the Explorer platform and monitored BMS response at power-on, during active measurement sessions, and under USB data transfer load. The BMS did not trip at any stage, and voltage held within operating bounds throughout sustained logging.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-use calibration on the Explorer:\u003c\/strong\u003e\n    After fitting this pack, run a full calibration cycle through the Explorer's instrument menu before heading into the field. The Explorer maps battery state during calibration — skipping this step causes the low-battery indicator to fire early on the first real measurement session, which wastes time on site.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the Explorer shuts down mid-measurement despite showing charge remaining\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH cells age in a way that compresses the usable voltage window without changing the resting voltage much. The Explorer reads the pack as charged at rest, but under the combined load of the sensor module and display, voltage sags below the instrument's cutoff threshold momentarily — enough to trigger a shutdown. A fresh pack eliminates the sag because the internal resistance of aged cells is the root cause, not capacity loss alone. If shutdowns persist after fitting this replacement, check that the battery contacts in the bay are clean and making full contact.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eExplorer won't accept a charge after the pack sat unused for months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eNi-MH packs that sit discharged for an extended period can drop below the BMS recovery threshold — typically around 5V for a 7.2V six-cell pack — and the charger will refuse to initiate a charge cycle. The BMS enters a sleep state to protect the cells from reverse-charging. To recover, use a charger with a trickle or recovery mode that applies a low current (around 100mA) to bring the pack back above the recovery threshold before switching to a normal charge rate. Once the pack reaches approximately 6V, a standard charger will take over and complete the cycle normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360430293082,"sku":"BWCS-CRE610SL-1","price":49.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 2 Year","offer_id":43360430325850,"sku":"BWCS-CRE610SL-2","price":58.99,"currency_code":"USD","in_stock":false},{"title":"Warranty 3 Year","offer_id":43360430358618,"sku":"BWCS-CRE610SL-3","price":64.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CRE610SL-1.webp?v=1778614638","url":"https:\/\/batteryweb.com\/products\/carlson-explorer-replacement-battery-72v-2000mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}