{"product_id":"cat-s40-replacement-battery-38v-2900mah-li-polymer","title":"CAT S40 Replacement Battery 3.8V 2900mAh 458002-S40","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCAT S40 — 3.8V Li-Polymer Replacement Battery (458002-S40)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 3.8V, 2900mAh lithium-polymer cell is a direct swap for the original 458002-S40 battery in the CAT S40 rugged smartphone. It restores power to calls, messaging, and applications when the original cell has degraded or failed to hold charge. Capacity figures come from the product data — 2900mAh \/ 11.02Wh.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCAT S40 fitment:\u003c\/strong\u003e\n    The S40 uses a specific connector pinout and BMS handshake tied to the 458002-S40 cell. This replacement matches that pinout and voltage rail so the phone's charge IC accepts the cell without triggering a protection fault on startup.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the S40 platform. The BMS accepted the cell without lockout, the charge IC ramped normally, and the fuel gauge IC began tracking state-of-charge within the first cycle.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle fast charge hold-off:\u003c\/strong\u003e\n    On first use after installation, disable fast charging for one complete discharge-charge cycle. This lets the fuel gauge IC recalibrate against the new cell's discharge curve before high-current charging pushes current into an uncalibrated cell.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eWhy the CAT S40 reports wrong battery percentage after a cell swap\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe S40's fuel gauge IC builds its state-of-charge model against the original cell's impedance and discharge curve. When you fit a new cell, the IC is still referencing the old degraded curve, so the percentage it reports drifts from the cell's actual charge level. This mismatch shows up as jumpy readings or a percentage that doesn't move for long stretches, then drops suddenly. One full discharge down to automatic shutdown followed by a full charge resets the coulomb counter and lets the IC map the new cell correctly.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSudden shutdown at 20–30% on the replacement cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens when the modem or display draws a high-current burst and the cell voltage drops below the BMS cutoff threshold before the fuel gauge has finished calibrating. The gauge still shows 20–30%, but the cell voltage has already sagged below 3.4V under load. It's not a faulty cell — it's the IC working from a mismatched discharge model. Complete one full calibration cycle and the shutdowns stop. If the problem persists past two full cycles, check that the charge IC is reaching 4.2V at end of charge before disconnecting.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43392003833946,"sku":"BWCS-CAS400SL-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43392003866714,"sku":"BWCS-CAS400SL-2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43392003899482,"sku":"BWCS-CAS400SL-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CAS400SL-1.webp?v=1779142903","url":"https:\/\/batteryweb.com\/products\/cat-s40-replacement-battery-38v-2900mah-li-polymer","provider":"BatteryWeb","version":"1.0","type":"link"}