{"product_id":"cavotec-microcontrol-mc-1000-transmitter-replacement-battery-6v-700mah-ni-mh","title":"Cavotec MC-1000 Crane Remote Replacement Battery 6V 700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCavotec Microcontrol MC-1000 \/ MC-2000 Transmitter — 6V Ni-MH Replacement Battery (B02000)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 6V, 700mAh Ni-MH replacement battery for the Cavotec Microcontrol MC-1000 and MC-2000 wireless crane transmitters. It replaces OEM part numbers B02000 and M5-1051-1000. These transmitters are used to operate overhead cranes and material handling equipment from a distance, so a dead battery stops work on the floor.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMC-1000 and MC-2000 compatibility:\u003c\/strong\u003e\n    Both transmitter models run the same 6V battery rail, share the same physical housing dimensions, and use the same connector and BMS handshake — which is why one cell covers both platforms.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through charge and discharge cycles on the MC-1000 transmitter and confirmed the BMS accepted the cell without error codes, held steady voltage under radio transmission load, and triggered the low-battery alert at the correct threshold.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eStorage charge for infrequent crane operations:\u003c\/strong\u003e\n    If the transmitter sits idle between jobs, put the battery on charge once a month. Ni-MH cells self-discharge faster than Li-ion — a cell left uncharged for several months can drop below recovery voltage and refuse to accept a charge, even when connected to the correct charger.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSolenoid activation causing power dropout on the MC-1000\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eWhen a crane solenoid or relay fires, the inrush current spike hits the transmitter battery hard and fast. A cell with reduced capacity — even one that reads \"charged\" — can sag below the transmitter's minimum operating voltage during that spike, causing the unit to drop out or reset mid-operation. This is not a transmitter fault. The 700mAh rating on this cell is matched to the MC-1000's inrush tolerance. If dropout persists after fitting a new, fully charged cell, check the transmitter's internal contacts for corrosion before suspecting the battery.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTransmitter showing low battery immediately after fitting a new cell\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eA new cell shipped in storage state typically sits at 4.8–5.0V rather than the full 6V the transmitter expects. The MC-1000 reads this as a low or depleted battery — which is correct, because the cell genuinely is not at operating voltage yet. This is not a faulty battery. Connect the transmitter to its charger before first use and allow a full charge cycle to complete. Once the cell reaches 6V, the low-battery indicator will clear and the unit will operate normally.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360063160410,"sku":"BWCS-CMC100BL-1","price":37.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360063193178,"sku":"BWCS-CMC100BL-2","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360063225946,"sku":"BWCS-CMC100BL-3","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CMC100BL-1.webp?v=1778610750","url":"https:\/\/batteryweb.com\/products\/cavotec-microcontrol-mc-1000-transmitter-replacement-battery-6v-700mah-ni-mh","provider":"BatteryWeb","version":"1.0","type":"link"}