{"product_id":"cecotec-conga-replacement-battery-144v-5200mah-li-ion","title":"Cecotec Conga 98593 14.4V Replacement Battery 5200mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCecotec Conga (98593 \/ RR47102) — 14.4V Li-ion Replacement Battery\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 14.4V 5200mAh (74.88Wh) lithium-ion battery for Cecotec Conga robotic vacuum cleaners. It replaces OEM part numbers 98593 and RR47102. When the original cell degrades after repeated charge cycles, this swap restores the vacuum's cleaning performance to factory spec.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConga robotic platform compatibility:\u003c\/strong\u003e\n    Cecotec Conga robots operating on the 14.4V rail share a common battery bay and BMS handshake. This cell matches that voltage and connector format, so the robot's charge management system recognises it and proceeds through the charge cycle normally.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this cell through full charge and discharge cycles on a Conga unit. The BMS cleared all protection flags, accepted charge without tripping overcurrent, and the robot completed navigation runs without mid-cycle shutdown.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eDock charging habit for Conga units:\u003c\/strong\u003e\n    Do not leave the robot parked on its charging dock permanently. Conga units held on continuous dock charge develop capacity fade faster than those charged only when depleted. Charge to full, then remove from the dock until the next use.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eSuction dropping before the battery indicator reaches low\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis happens because the motor draws more current when airflow is restricted — a partially blocked filter forces the motor to work harder than rated, pulling voltage down at the cell level. The BMS reads this voltage sag and may throttle output before the indicator LED reflects anything. The robot appears to have power, but suction weakens noticeably on carpet. Clean or replace the filter first, then test again — a clear airpath drops motor draw back to rated levels and the sag disappears.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eRobot cuts out mid-run then recovers after sitting for a minute\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThis is a BMS overcurrent trip, not a dead battery. Sustained restricted suction causes the motor to pull current above the BMS protection threshold, which cuts power to the drive and suction systems. Once the cell voltage recovers slightly at rest, the BMS resets and the robot powers back on. Check the brush roll for hair wrap and inspect the filter — clearing both reduces sustained motor load and stops the trip from recurring.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43426401189978,"sku":"BWCS-CNS959VX-1","price":61.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43426401222746,"sku":"BWCS-CNS959VX-2","price":71.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43426401255514,"sku":"BWCS-CNS959VX-3","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CNS959VX_1.webp?v=1779933099","url":"https:\/\/batteryweb.com\/products\/cecotec-conga-replacement-battery-144v-5200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}