{"product_id":"cem-dt-9880-replacement-battery-74v-1200mah-li-ion","title":"CEM DT-9880 Replacement Battery 7.4V 1200mAh Li-ion PT603450-2S","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCEM DT-9880 Series — 7.4V Li-ion Replacement Battery (PT603450-2S)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V, 1200mAh Li-ion replacement battery for the CEM DT-9880 digital multimeter and compatible models. It fits the DT-9880, DT-9881, DT-9883M, and DT-9880M, slotting into the same battery bay as the original PT603450-2S pack. Physical dimensions are 54.84 × 35.66 × 15.62mm — verify against your bay before ordering.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDT-9880 series compatibility:\u003c\/strong\u003e\n    These meters share the same 7.4V power rail, connector pinout, and BMS handshake protocol across the DT-9880, DT-9881, DT-9883M, and DT-9880M. One cell configuration covers the full range because CEM standardised the pack across this measurement platform.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this pack through charge and discharge on the DT-9880 platform. The BMS responded correctly to cell voltage thresholds, and the meter's low-battery indicator triggered at the expected cutoff point without false trips during sustained measurement load.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-install calibration step:\u003c\/strong\u003e\n    After fitting this pack, run a full calibration cycle through the instrument menu before field deployment. The DT-9880 maps battery state during calibration — skipping this causes the low-battery warning to trigger prematurely on the first measurement session, even when the pack is fully charged.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eDT-9880 shutting down mid-measurement during sustained sensor load\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eThe DT-9880 draws a sustained current during active measurements — particularly when the backlight, input protection circuitry, and analogue front-end are all running simultaneously. An aged or partially discharged cell can't hold the voltage rail steady under this combined load, and the BMS cuts the pack to protect the cells. This isn't the meter malfunctioning — it's the BMS doing its job when cell voltage sags below the protection threshold. Replace the pack and charge it fully before returning to field work.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003ePack will not charge after the meter sat unused for several months\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge slowly in storage. If the DT-9880 sat unused for months, the pack voltage may have dropped below the charger's detection threshold — typically around 2.5V per cell — and the BMS enters a sleep state that blocks normal charging. Connect the pack to a charger that supports a low-voltage recovery or trickle mode; this brings cell voltage back above the BMS wake-up threshold, usually 3.0V per cell, and normal charging resumes. If recovery charging is not available, the pack has likely crossed the point of no return and needs replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43360539705434,"sku":"BWCS-CDT980SL-1","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43360539738202,"sku":"BWCS-CDT980SL-2","price":46.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43360539770970,"sku":"BWCS-CDT980SL-3","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CDT980SL-1.webp?v=1778615946","url":"https:\/\/batteryweb.com\/products\/cem-dt-9880-replacement-battery-74v-1200mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}