{"product_id":"centerm-v8-replacement-battery-74v-2700mah-li-ion","title":"Centerm V8 POS Terminal Replacement Battery 7.4V 2700mAh","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCenterm V8 \/ K9 — 7.4V Li-ion Replacement Battery (PD0740)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis is a 7.4V 2700mAh Li-ion replacement battery for the Centerm V8 and K9 mobile payment terminals. It carries OEM part number PD0740 and fits both models directly. Capacity is 2700mAh (19.98Wh), matching the original cell specification.\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eV8 and K9 platform compatibility:\u003c\/strong\u003e\n    Both terminals share the same battery bay geometry, connector pinout, and BMS handshake protocol — that is why one cell covers both models. Swapping between units carries no additional configuration.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We cycled this cell through multiple full charge and discharge passes on a V8 unit. The BMS accepted the handshake without fault codes, and the charge IC reached float voltage cleanly with no overcurrent trips during the receipt printer motor-start surge.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eFirst-cycle calibration tip:\u003c\/strong\u003e\n    After installing this battery, run the terminal through at least one complete transaction — card read, receipt print, and screen timeout — before deploying it live. The V8 maps battery capacity during normal operation, and the charge indicator will not read accurately until one full power cycle completes.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eReceipt printer motor draw triggering BMS overcurrent on the V8\u003c\/h3\u003e\n\n  \u003cp class=\"bpw-desc-p\"\u003eThe V8's internal thermal receipt printer pulls a sharp current spike at motor start — around 1.5–2A above the steady-state draw — that arrives in under 50 milliseconds. A degraded original cell can no longer absorb this surge without the BMS tripping overcurrent protection. This replacement cell uses a higher-capacity cell chemistry that handles the transient without hitting the BMS threshold. If you see mid-print reboots on a brand-new battery, confirm the terminal firmware is current — older firmware versions set a tighter BMS overcurrent limit.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eTerminal stuck on boot logo after sitting unused in a drawer\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eLi-ion cells self-discharge at roughly 2–3% per month. A V8 left unused for several months can drop below the BMS recovery threshold — typically around 2.5V per cell, or 5.0V pack voltage — causing the terminal to display a boot logo then shut off immediately. Connect the terminal to its dock charger and leave it for a full 90-minute charge before attempting to power on. If the charger LED does not illuminate within five minutes, the cell is below the charger's recovery voltage floor — hold the power button for 10 seconds to force a recovery charge cycle on most V8 firmware versions.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43415923785818,"sku":"BWCS-CTV800BL-1","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43415923818586,"sku":"BWCS-CTV800BL-2","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43415923851354,"sku":"BWCS-CTV800BL-3","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CTV800BL-1.webp?v=1779757950","url":"https:\/\/batteryweb.com\/products\/centerm-v8-replacement-battery-74v-2700mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}