{"product_id":"cetc-av6481-replacement-battery-111v-6800mah-li-ion","title":"CETC AV6481 Survey Instrument Replacement Battery 11.1V 6800mAh BT-81","description":"\u003cdiv class=\"bpw-desc\"\u003e\n  \u003ch2 class=\"bpw-desc-h2\"\u003eCETC AV6481 — 11.1V Li-ion Replacement Battery (BT-81)\u003c\/h2\u003e\n\n  \u003cp class=\"bpw-desc-lead\"\u003eThis 11.1V 6800mAh Li-ion pack replaces the BT-81, BT-81A, BT-81B, and HYLB-2025B batteries in the CETC AV6481 surveying and testing instrument. It covers field survey, measurement, and equipment testing applications where extended power capacity matters. Voltage and capacity match OEM spec — 11.1V, 6800mAh (75.48Wh).\u003c\/p\u003e\n\n  \u003cul class=\"bpw-desc-bullets\"\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAV6481 platform fit:\u003c\/strong\u003e\n    The AV6481 family uses a single battery bay with a common BMS handshake across BT-81, BT-81A, and BT-81B variants. All three share the same voltage rail and connector pinout, so one pack covers the range without adapter changes.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003eBench tested on actual hardware:\u003c\/strong\u003e\n    We ran this pack through instrument power-up and active sensor load cycles. The BMS held stable under probe initialisation current spikes and did not trip during sustained measurement logging sequences.\u003c\/li\u003e\n\n    \u003cli\u003e\n\u003cstrong\u003ePre-deployment calibration cycle:\u003c\/strong\u003e\n    After installing this pack, run a full calibration cycle through the AV6481 instrument menu before heading into the field. The instrument maps battery state during calibration — skipping this step causes premature low-battery warnings during the first measurement session, even when the pack is fully charged.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003chr class=\"bpw-desc-divider\"\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eBMS cutoff when the AV6481 initialises a probe or sensor module\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eWhen the AV6481 powers up a probe or external sensor, the instrument draws a short but sharp current spike to initialise the module. An aged or deeply discharged pack can drop below the BMS protection threshold during this spike, causing the instrument to cut power before the sensor even completes startup. This is not a fault with the pack — it is the BMS doing its job when cell voltage is marginal. Charge the replacement pack fully to 12.6V before first use, then allow the instrument to complete a normal startup sequence before connecting any probe modules.\u003c\/p\u003e\n\n  \u003ch3 class=\"bpw-desc-h3\"\u003eAV6481 shuts down mid-logging under sustained sensor load\u003c\/h3\u003e\n  \u003cp class=\"bpw-desc-p\"\u003eSustained sensor activity during a logging session pulls a steady draw that causes voltage to sag across the cells. If the pack is partially discharged going into a session, this sag can cross the BMS undervoltage cutoff point, triggering a shutdown and sometimes corrupting the active log file. The fix is straightforward — start field sessions with a full charge, and watch for the first low-voltage warning as a hard stop signal rather than a caution. On the AV6481, the shutdown threshold sits close enough to the warning threshold that there is little buffer between the two — treat the first alert as the last useful warning before cutoff.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BatteryWeb","offers":[{"title":"Warranty 1 Year","offer_id":43303969259610,"sku":"BWCS-CAV648SL-1","price":123.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 2 Year","offer_id":43303969292378,"sku":"BWCS-CAV648SL-2","price":147.99,"currency_code":"USD","in_stock":true},{"title":"Warranty 3 Year","offer_id":43303969325146,"sku":"BWCS-CAV648SL-3","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/4775\/0746\/files\/BW-CS-CAV648SL_1.webp?v=1777520716","url":"https:\/\/batteryweb.com\/products\/cetc-av6481-replacement-battery-111v-6800mah-li-ion","provider":"BatteryWeb","version":"1.0","type":"link"}